XUNTOP Digital Angle Gauge with Laser Gray
A pocket-size aluminium inclinometer with four magnetic faces, dual Class-2 lasers and USB-C charging, measuring in 90° steps to ±0.1° at level and plumb or ±0.2° elsewhere with IP54 protection
- ±0.1° accuracy at 0° and 90° for precise alignment
- Dual Class 2 lasers enable fast horizontal and symmetrical layout
- Four magnetic sides grip ferrous surfaces securely in any orientation
- IP54 rating resists dust and water splashes on job sites
- USB-C rechargeable battery with auto-inverting display for upside-down use
What it is and who it's for
The XUNTOP Digital Angle Gauge with Laser is a compact aluminium inclinometer that combines a digital level box with dual Class 2 lasers. It is built for woodworkers, furniture makers and DIY installers who need quick angle checks and hands-free alignment on metal surfaces. The IP54 rating and bright backlight keep it readable in dusty workshops or bright daylight.
Accuracy that decides fit
The gauge measures in four 90° quadrants and can be zeroed at any angle for relative comparison. Stated accuracy is ±.1° at 0° and 90° and ±.2° across the remaining range, with .1° repeatability. Calibration drift, temperature extremes, humidity, magnetic fields or low battery can degrade these figures, so verify before critical cuts.
Capacity and headroom
The 2.4 by 2.4 by 1.2 inch cube fits in a pocket or the supplied belt bag and runs from an internal USB-C rechargeable battery that auto-inverts the display when upside down. Four magnetic sides hold it firmly on ferrous stock for hands-free use. It handles layout, framing and decoration hanging, but lacks angular data logging or wireless output for remote monitoring.
Highlights
- ±0.1° accuracy at 0° and 90° for precise alignment
- Dual Class 2 lasers enable fast horizontal and symmetrical layout
- Four magnetic sides grip ferrous surfaces securely in any orientation
- IP54 rating resists dust and water splashes on job sites
- USB-C rechargeable battery with auto-inverting display for upside-down use
Specifications
No published specifications for this item yet.
Questions about this item
What does the ±0.1° accuracy at 0° and 90° mean when I'm levelling a shelf?
At level and plumb the gauge reads within a tenth of a degree, so a shelf will be virtually dead flat; at other angles the tolerance widens to ±0.2°.
How does the Class 2 laser with <1mW output limit what I can do?
The low-power beam is safe for indoor alignment tasks like hanging pictures or tiling, but it won't reach far in bright daylight or substitute a rotary laser for long runs.
Will the 2.4in cube fit on a 1.2in thick pipe and stay put?
Four magnetic faces grip ferrous surfaces firmly, and the 1.2in height clears most pipe flanges, so it clamps securely on thin or curved metal.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
