We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

XRDS-RF RG316 BNC Male-to-Male Coaxial Cable 3FT 50 Ohm 2PCS

SKU CH-VV6M-4Q158

Two 3-foot 50-ohm RG316 coaxial cables with BNC male connectors on each end, silver-plated copper conductors and FEP jacket for indoor or outdoor RF use

  • TypeCoaxial
  • ColorSilver
  • Length3 FT
  • Connector Number2
  • Connector DetailBNC
  • Terminal GenderMale-to-Male
  • Low-loss signal transmission with 50 ohm RG316 coaxial construction
  • Silver-plated copper conductor and braid reduce attenuation at high frequency
  • PTFE insulation and FEP jacket withstand heat, moisture and corrosion
  • Two 3-foot male-to-male BNC cables included for flexible RF connections
  • Suitable for indoor or outdoor scanner, ham radio and video applications

BNC Male-to-Male RG316 Coaxial Cable 3 ft 50 Ohm

This pair of BNC male-to-male cables uses low-loss RG316 coax with a silver-plated copper centre conductor, PTFE insulation, silver-plated copper braid and an FEP jacket. Each cable is three feet long and presents a 50 ohm characteristic impedance. The set contains two cables and is sold new.

Suits RF work, ham radio.

These cables serve radio communication, antenna scanners, handheld ham radios and general RF or flexible-network connections indoors or outdoors. They are not for installers who need longer runs, different connector types or a different characteristic impedance for video distribution.

50 ohm impedance matches standard RF equipment

The 50 ohm rating is the single specification that determines compatibility with most RF transceivers, test gear and antenna systems. Verify that your devices require 50 ohm coax before purchasing.

Highlights

  • Low-loss signal transmission with 50 ohm RG316 coaxial construction
  • Silver-plated copper conductor and braid reduce attenuation at high frequency
  • PTFE insulation and FEP jacket withstand heat, moisture and corrosion
  • Two 3-foot male-to-male BNC cables included for flexible RF connections
  • Suitable for indoor or outdoor scanner, ham radio and video applications

Specifications

BrandXRDS -RF
ModelRG316
TypeCoaxial
ColorSilver
Length3 FT
Connector Number2
Connector DetailBNC
Terminal GenderMale-to-Male
SpecificationsBNC, jacket
ShieldingPortable
FeaturesPortable

Questions about this item

What device must already have a BNC female port to connect this 3 ft RG316 cable?

Any scanner, handheld ham radio, antenna attenuator or RF equipment with a BNC female jack will accept the male plugs on both ends.

Can the 50 ohm impedance of this RG316 cable match legacy 50 ohm BNC gear already in the shack?

Yes, the cable is specified at 50 ohm so it will maintain impedance continuity with existing 50 ohm BNC devices.

How can I verify the silver-plated copper inner conductor is giving low loss after installation?

Measure voltage standing wave ratio with a suitable meter; a low VSWR reading confirms the cable is performing to its 50 ohm specification.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.