We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB-C to USB-A cable with dual screw-locking connectors, panel mount, 120cm 200cm 300cm

xiwai

xiwai USB 3.1 Type-C Dual Screw Locking to USB 3.0 Cable 120cm 200cm 300cm Panel Mount

SKU CH-5ZZV-B1PXM

USB 3.1 Type-C cable with dual screw locking and panel mount, available in 120cm, 200cm or 300cm lengths

  • Connector TypeUSB C to USB A
  • ColorBlack

Cable Length 10 Feet

  • Secure dual-screw locking prevents accidental disconnection
  • Panel-mount design enables fixed installation in equipment
  • Reversible USB-C plug inserts either way up
  • USB 3.1 Gen 1 speeds up to 5 Gbit/s
  • Choice of 120 cm, 200 cm or 300 cm lengths

Secure USB-C connection for industrial use

This cable provides a USB 3.1 Type-C plug with dual screw locking to a standard USB 3.0 Type-A connector. The panel-mount design ensures a secure mating mechanism that resists vibration and accidental disconnection. It suits industrial equipment, embedded systems and any application where a reliable data link is critical. The reversible Type-C end simplifies insertion in tight enclosures.

Check panel cut-out and port spacing before ordering

Verify that your chassis or bracket has the correct cut-out dimensions for the panel-mount flange and that the locking screws align with the threaded holes on your device. Confirm the host side offers a standard USB 3.0 Type-A receptacle and that the required cable length — 120cm, 200cm or 300cm — fits your routing path without strain. Ensure the connected devices support the USB 3.1 Gen 1 data rate the cable carries.

Locking hardware adds mechanical security only

The dual screw locking connector and panel-mount flange replace a standard friction-fit plug with a mechanically fastened joint. This change prevents the cable from working loose under vibration or thermal cycling but does not alter the electrical specification or data throughput. No additional drivers, firmware or software are supplied; the cable functions as a passive USB 3.0 link once the screws are tightened.

Highlights

  • Secure dual-screw locking prevents accidental disconnection
  • Panel-mount design enables fixed installation in equipment
  • Reversible USB-C plug inserts either way up
  • USB 3.1 Gen 1 speeds up to 5 Gbit/s
  • Choice of 120 cm, 200 cm or 300 cm lengths

Specifications

Connector TypeUSB C to USB A
ColorBlack

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the cable come with the panel-mount hardware or must I source the screws and bracket separately?

The dual screw-locking USB-C connector includes the panel-mount locking screw, so no extra mounting hardware is required for installation.

Should I choose the 120 cm, 200 cm or 300 cm length for a typical industrial panel-mount setup?

Pick the shortest length that reaches from the panel cut-out to the host USB-A port; 120 cm suits tight enclosures, 200 cm covers standard rack depth, 300 cm allows routing across larger cabinets.

What does the USB 3.1 label on the Type-C end mean for real-world transfer speed when plugged into a USB 3.0 Type-A port?

The connection will operate at USB 3.0 rates because the Type-A end is USB 3.0; the USB 3.1 Type-C plug simply provides a reversible, screw-locked interface without raising the throughput ceiling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.