We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

xiwai

xiwai Hd-199-Bk-0.1M-Xy usb cable 1080P .1m

SKU CH-TBDN-GRE5R MPN Hd-199-Bk-0.1M-Xy

Connects mini-port video devices to standard inputs using a soft FPC flat cable for gimbal stability

  • Connector TypeMicro USB to USB A
  • Ultra-flexible FPC design protects gimbal stability during flight
  • Mini-to-Micro connectors link FPV camera to standard video input
  • 1080P video support keeps aerial footage sharp
  • Supplied unassembled for custom routing on multicopter frames
  • 1 m length reduces weight and cable drag

Micro USB to USB A cable for FPV video

This 0.1 metre flat FPC cable connects a camera or transmitter with a micro USB port to a display or recorder that uses a standard USB A input. It is built for multicopter aerial photography where a stiff wire would disturb a lightweight brushless gimbal. The ultra-soft jacket keeps the gimbal balanced during flight. Connectors ship separately and must be assembled by the user following the included guide.

Replaces rigid USB leads on mini gimbals

Standard USB cables are often too thick and springy for micro-sized gimbals, causing vibration or limited tilt travel. This flat cable solves that by adding almost no torque at the connector. The upgrade is worth it when the existing lead makes the gimbal hunt or when the airframe leaves no slack for a bulky cable. It is not suited for builds that need a locked, pre-assembled connector or a longer run between components.

Handles 1080P video on short links

The 10 centimetre length carries a 1080P signal cleanly between a micro-port camera and a standard-input monitor or DVR. Longer runs of 20, 50 or 80 centimetres are available in the same family if the airframe demands more reach. The flat FPC construction keeps weight near zero, but the tiny conductors limit current capacity, so it cannot power hungry accessories or replace a full USB data-and-power harness.

Highlights

  • Ultra-flexible FPC design protects gimbal stability during flight
  • Mini-to-Micro connectors link FPV camera to standard video input
  • 1080P video support keeps aerial footage sharp
  • Supplied unassembled for custom routing on multicopter frames
  • 1 m length reduces weight and cable drag

Specifications

Connector TypeMicro USB to USB A

Questions about this item

What clearance does the 0.1 m flat FPC cable need to route around a lightweight gimbal?

The 10 cm flat cable is very soft and designed for brushless gimbal applications, so it adds minimal stiffness that could affect gimbal performance.

How do I assemble the Mini Male and Micro Male connectors that ship separately?

Follow the assembly guide photo: insert each connector into the corresponding end of the flat FPC cable and secure the latch; the cable and connectors arrive unassembled.

When should I replace this 1080P FPV video cable?

Replace it if the flat FPC cable develops kinks, the connector latches no longer hold, or video feed shows intermittent artefacts during multicopter aerial photography.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.