xiwai
xiwai Hd-189-Bk-0.1M-Xy usb cable 0.1M
A 10 cm Micro USB to USB A flat extension cable designed for lightweight gimbal and aerial photography use
- Connector TypeMicro USB to USB A
- Ultra-soft cable preserves gimbal stability on lightweight builds
- 10 cm length keeps multicopter wiring tidy and light
- Micro USB to USB A connects cameras with micro ports
- 1080p video support for clear FPV and HDTV feeds
- Flat FPC design reduces bulk in tight aerial frames
Ultra-short FPV video cable
The xiwai Hd-189-Bk-0.1M-Xy is a 10 cm flat flexible cable with a Micro USB male connector on one end and a Mini USB female connector on the other. It is built for first-person-view video links on multicopters and aerial photography platforms where a standard cable would be too stiff for a brushless gimbal. The flat FPC construction keeps the assembly light and supple so it does not upset delicate gimbal balance. Video signals up to 1080 resolution pass through the extension without active circuitry.
Builders who need a pliable gimbal link
Pilots assembling compact FPV rigs with Micro USB cameras and Mini USB video transmitters will appreciate the minimal length and extreme flexibility. The cable ships with connectors detached so you can route the flat ribbon through tight frame cut-outs before crimping the ends yourself. Operators who want a ready-to-use lead, a longer reach than 10 cm, or a connection between matching USB types should look at other options. The DIY assembly step also makes it unsuitable for anyone who cannot or prefers not to terminate fine-pitch FPC contacts.
Micro USB male to Mini USB female
The single specification that decides compatibility is the connector pairing: a Micro USB plug on the device side and a Mini USB socket on the transmitter side. Only cameras or sources equipped with a Micro USB port and receivers that accept a Mini USB plug can use this cable directly. Length is fixed at 10 cm and the flat ribbon format cannot be swapped for a round profile, so the physical interface and form factor together determine whether the part fits the build.
Highlights
- Ultra-soft cable preserves gimbal stability on lightweight builds
- 10 cm length keeps multicopter wiring tidy and light
- Micro USB to USB A connects cameras with micro ports
- 1080p video support for clear FPV and HDTV feeds
- Flat FPC design reduces bulk in tight aerial frames
Specifications
| Connector Type | Micro USB to USB A |
|---|
Questions about this item
Which length should I choose for my gimbal — 10 cm, 20 cm, 50 cm or 80 cm?
Pick the shortest length that reaches between your camera’s Micro USB port and the video transmitter; 10 cm suits tight builds, while 50 cm or 80 cm give more routing room.
What does the 1080P rating mean when the cable is installed in my FPV quad?
It indicates the cable can carry a 1080P video signal from a Micro USB camera to a standard video input without noticeable degradation.
The cable uses a Micro USB to USB A connector — what does that limit in practice?
It only fits devices with a Micro USB port on the camera side and a full-size USB A port on the receiver side; it will not connect to Mini USB or USB C ports.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



