We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White low-profile ceiling mount with retractable arms, adjustable tilt and swivel, holds 30lbs

XINLEI PR14W Projector Ceiling Mount White 30lbs

SKU CH-Y83Z-6PGQS

Ceiling mount holds projectors up to 30 lbs with 15° tilt, 20° swivel and 360° rotation

  • TypeCeiling Mount
  • CompatibilityProjectors
  • SpecificationsAdjustable, PR14W, XINLEI, Alloy Steel, 6.3 L x 4.33 W x 5 H
  • Screen MaterialAlloy Steel
  • ColorWhite
  • FeaturesAdjustable, Ceiling Mount, Projectors, Alloy Steel, 30 pound
  • Universal fit for projectors with mounting holes from 2.83" to 11.42
  • Supports equipment up to 30lbs with cold-rolled steel construction
  • Tilt ±15°, swivel ±20°, rotate 360° for flat or sloped ceilings
  • Low-profile design holds projector just 5" from ceiling surface
  • Quick-release hooks and included hardware simplify installation

Universal projector ceiling mount

The XINLEI PR14W is a white alloy-steel ceiling mount designed for projectors weighing up to 30 pounds. It suits home, office, school or commercial installations where a low-profile, secure attachment is required.

Capacity and headroom

Mounting-hole spacing from 2.83 to 11.42 inches is supported, covering the majority of current projectors. The 30-pound (13.6 kg) load limit defines the upper boundary; heavier units need a different solution.

Build integration

The bracket sits 5 inches from the ceiling and provides tilt of ±15°, swivel of ±20° and 360° rotation for flat or sloped ceilings. Quick-release hooks and included hardware simplify mounting on concrete, brick or wooden studs; four projector mounting holes are required.

Highlights

  • Universal fit for projectors with mounting holes from 2.83" to 11.42
  • Supports equipment up to 30lbs with cold-rolled steel construction
  • Tilt ±15°, swivel ±20°, rotate 360° for flat or sloped ceilings
  • Low-profile design holds projector just 5" from ceiling surface
  • Quick-release hooks and included hardware simplify installation

Specifications

BrandXINLEI
ModelPR14W
Part NumberPR14W
TypeCeiling Mount
CompatibilityProjectors
SpecificationsAdjustable, PR14W, XINLEI, Alloy Steel, 6.3 L x 4.33 W x 5 H inches, 30 pounds, Ceiling Mount, Projectors
Screen MaterialAlloy Steel
ColorWhite
FeaturesAdjustable, Ceiling Mount, Projectors, Alloy Steel, 30 pounds

Questions about this item

Will the XINLEI PR14W ceiling mount fit the mounting hole pattern on my existing projector?

The mount supports projectors with four mounting holes spaced between 2.83" and 11.42" apart. Measure your projector's hole spacing and confirm it has exactly four holes before buying.

How can I verify the PR14W is holding the projector at the correct angle once installed?

After mounting, check that the projector sits level and the image is rectangular on screen. The mount provides tilt of +/- 15°, swivel of +/- 20° and full 360° rotation for precise alignment.

Does the PR14W package include all the bolts and anchors needed for a concrete ceiling, or must I buy them separately?

The box contains the mount, quick-release hooks, extension arms and all installation hardware with instructions. No extra fasteners are required for concrete, brick or wooden stud ceilings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.