We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 90 degree PCIe 5.0 12+4pin extension cable with mesh paracord sleeving 300mm long

Xenlazar

Xenlazar 600W PCIe 5.0 90° 12+4pin Extension Cable White 300mm

SKU CH-Y9DK-8DNK1

White 300mm PCIe 5.0 12+4pin extension cable with a patented 90° L-angled connector rated for 600W GPUs

  • TypeExtension Cables
  • ColorWhite
  • Length300mm

Color White

Style Type B

  • Type B
  • Type A

Struck-through versions exist but are not stocked here.

  • 90-degree patented angle prevents loose pins and contact issues
  • Supplies up to 600W for PCIe 5.0 graphics cards
  • Flexible mesh paracord sleeving delivers a clean, professional build
  • Direct 12+4pin to 12+4pin connection needs no adapter
  • 300mm white length fits compact routing in tight cases

Purpose-built GPU power extension

This 12+4pin to 12+4pin extension cable connects a PCIe 5.0 graphics card to a compatible power supply without an adapter. The 90-degree L-angled patent design reduces strain on the connector and helps prevent loose pins or defective contact. It is intended for builders installing high-TDP GPUs in cases where a straight connector would press against the side panel.

600W headroom and 300mm reach

The cable is rated to deliver up to 600W, matching the maximum specification for the 12VHPWR interface used by current flagship graphics cards. At 300mm it provides enough length to route behind a motherboard tray or around a bulky cooler while keeping slack to a minimum. Builds that need a longer run to a bottom-mounted PSU or that route cables through tight grommets may find the fixed length limiting.

PCIe 5.0 connector constraints

The 12+4pin connector follows the PCIe 5.0 power standard and carries both the 12V power pins and the four sense pins required for handshake with the GPU. Because the sense pins are shorter, the plug must be fully seated before the card will power on; the angled housing assists alignment but does not eliminate the need for a firm insertion. The cable does not convert older 6-pin or 8-pin outputs, so the power supply must already provide a native 12VHPWR port.

Highlights

  • 90-degree patented angle prevents loose pins and contact issues
  • Supplies up to 600W for PCIe 5.0 graphics cards
  • Flexible mesh paracord sleeving delivers a clean, professional build
  • Direct 12+4pin to 12+4pin connection needs no adapter
  • 300mm white length fits compact routing in tight cases

Specifications

BrandX-Enlazar
TypeExtension Cables
ColorWhite
Length300mm

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 90° angled 12+4pin connector clear my existing PCIe 5.0 graphics card and case side panel?

The patented 90° L-angled connector sits flush against the GPU, reducing strain on the 12+4pin socket and saving depth so the side panel closes cleanly.

How can I verify the extension is delivering the full 600W to my GPU after installation?

The GPU will report its maximum power draw in monitoring software and run demanding workloads without throttling or shutdowns, confirming the cable handles the rated 600W.

Does the 300mm white mesh-sleeved cable include both 12+4pin ends or do I need a separate PSU cable?

The box contains one 12+4pin to 12+4pin extension only; your power supply must already have a native 12+4pin PCIe 5.0 cable to plug into the other end.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.