XANHAM SC302 SATA cable 18 inch 90 degree to 180 degree black
An 18 inch SATA cable with a 90 degree connector on one end and a 180 degree connector on the other, supporting 6 Gbps data transfer for internal drives
- TypeSATA
- ColorBlack
- Connector DetailSata
- Terminal GenderMale-to-Male
- Speed6 gigabits_per_second
- ConductorCopper
- 6 Gbps transfer speed for fast data moves
- 18 inch 90 degree to 180 degree angled connectors for tight spaces
- Latching connectors secure the link during operation
- 26 AWG tinned copper conductors with foil shielding for stable signals
- UL listed AWM 2725 with VW-1 fire resistance up to 80°C
18-Inch SATA III Cable
This 18-inch SATA III cable connects motherboards or host controllers to internal hard drives, SSDs and optical drives. The 90-degree connector on one end and 180-degree connector on the other suit tight spaces behind drive bays. It is built for builders who need a reliable spare or replacement link.
6 Gbps Interface Limit
The SATA 3.0 interface tops out at 6 Gbps, so faster solid-state drives will not reach their maximum potential throughput on this link. Backwards compatibility with SATA I and II devices is maintained, but the cable cannot overcome the bus ceiling. Builders who need more bandwidth must choose a different interface.
90-Degree to 180-Degree Layout
The fixed 90-degree and 180-degree connector orientations decide whether the cable fits your specific motherboard port and drive bay arrangement. If your build requires straight-to-straight or dual right-angle ends, this part will not match the routing needed.
Highlights
- 6 Gbps transfer speed for fast data moves
- 18 inch 90 degree to 180 degree angled connectors for tight spaces
- Latching connectors secure the link during operation
- 26 AWG tinned copper conductors with foil shielding for stable signals
- UL listed AWM 2725 with VW-1 fire resistance up to 80°C
Specifications
| Brand | XANHAM |
|---|---|
| Model | SC302 |
| Type | SATA |
| Color | Black |
| Connector Detail | Sata |
| Terminal Gender | Male-to-Male |
| Speed | 6 gigabits_per_second |
| Conductor | Copper |
Questions about this item
Should I pick the 90-degree or 180-degree end for my motherboard?
This cable has a 90-degree connector on one end and a 180-degree connector on the other; use the 90-degree end where clearance is tight against the board.
What does the 6 Gbps rating deliver in a real system?
It supports the SATA III 6 Gbps interface, so a connected SSD or HDD can run at its full native speed without cable bottleneck.
Is the SATA III 6 Gbps interface backward compatible with older drives?
Yes, the cable works with SATA I and SATA II devices, though they will operate at their own lower speed limits.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



