WyreStorm
WyreStorm MX-0404-H2 4K 4×4 HDMI Matrix Switcher
Routes four 4K 60 Hz HDMI sources to four displays with HDCP 2.2 and HDR support in a 1U rackmount unit
- Routes any of four 4K sources to four displays
- 18 Gbps bandwidth carries 4K 60 Hz 4:4:4
- HDCP 2.2 plus HDR10, HLG and Dolby Vision support
- 1 U rackmount chassis with 100-240 V AC supply
- 600 MHz pixel clock for full 18 Gbps signal integrity
What it does
The WyreStorm MX-0404-H2 is a 4×4 HDMI matrix switcher that routes four HDMI sources to four independent displays. It handles 4K UHD and DCI 4K at 60Hz with 4:4:4 chroma sampling and 18Gbps bandwidth. Installers and AV integrators use it for conference rooms, digital signage or multi-room residential systems.
Sustained operation
The 1U rackmount chassis runs on 100240V AC and draws about 21W during continuous switching. HDCP 2.2 and HDR formats including HDR10, HLG and Dolby Vision remain active across all four outputs without signal degradation. A 600MHz pixel clock maintains timing stability over long operating periods.
Before ordering
Verify that each source and display uses HDMI Type-A connectors compatible with the four inputs and four outputs. Confirm the rack space can accommodate a 1U chassis and that the installation can supply 100240V AC power. The unit includes a 90-day seller warranty only.
Highlights
- Routes any of four 4K sources to four displays
- 18 Gbps bandwidth carries 4K 60 Hz 4:4:4
- HDCP 2.2 plus HDR10, HLG and Dolby Vision support
- 1 U rackmount chassis with 100-240 V AC supply
- 600 MHz pixel clock for full 18 Gbps signal integrity
Specifications
No published specifications for this item yet.
Questions about this item
How much heat and power does the MX-0404-H2 draw when running continuously?
It consumes approximately 21W from a 100-240V AC supply, so heat output stays modest in a 1U rackmount chassis.
Which sources and displays must I already own to use the four HDMI 2.0 inputs and outputs?
You need up to four HDMI 2.0 source devices and four HDMI 2.0 displays, all using Type-A cables.
Will the matrix pass 4K 60Hz 4:4:4 and HDR to my older 1080p projectors without downscaling everything?
Each output operates independently, so a 1080p projector receives its native resolution while other outputs keep full 4K 60Hz 4:4:4 and HDR.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



