WUQ
WUQ Transom Temperature Transducer XNT 9 HW MSI 150 T
Transom transducer adds temperature, Dual Spectrum CHIRP and MEGA imaging to compatible HELIX 7 units with a 20-foot cable
- TypeAccessories
- Accurate temperature readings via 20-foot cable for flexible transom mounting
- Clear CHIRP sonar detail using 150-220 kHz full, 180-240 kHz narrow, 140-200 kHz wide bands
- Deep-water CHIRP performance reaching 1200 ft (365 m) maximum depth
- Wide side-imaging coverage up to 800 ft (146 m) at 455 kHz
- Sharp MEGA Down Imaging to 75 ft (23 m) depth for bottom structure
Transducer for HELIX 7 Series
This transom-mount temperature transducer connects to HELIX 7 CHIRP MSI GPS G3, G3N, G4 and G4N units. It adds water-temperature data to sonar returns for anglers who track thermal layers. The 20-foot cable reaches most transom mounting points on small to mid-size boats.
Dual Spectrum CHIRP and MEGA Imaging Ranges
Dual Spectrum CHIRP operates at full 150-220 kHz, narrow 180-240 kHz and wide 140-200 kHz. Maximum depth reaches 1200 feet (365 m). Side imaging at 455 kHz covers 800 feet (146 m) side-to-side while MEGA Side Imaging at 1075-1150 kHz extends 250 feet (76 m). Down imaging at 455 kHz reaches 125 feet (38 m) and MEGA Down Imaging reaches 75 feet (23 m).
Transom Mount With 20-Foot Cable
The transducer clamps to the transom and routes a 20-foot cable to the display. Installation requires a flat mounting surface and clearance for the cable run. Common issues include turbulent water flow at high speed and interference from nearby metal fittings.
Highlights
- Accurate temperature readings via 20-foot cable for flexible transom mounting
- Clear CHIRP sonar detail using 150-220 kHz full, 180-240 kHz narrow, 140-200 kHz wide bands
- Deep-water CHIRP performance reaching 1200 ft (365 m) maximum depth
- Wide side-imaging coverage up to 800 ft (146 m) at 455 kHz
- Sharp MEGA Down Imaging to 75 ft (23 m) depth for bottom structure
Specifications
| Type | Accessories |
|---|
Questions about this item
Does the XNT 9 HW MSI 150 T transducer draw enough power to heat up during a full day on the water?
The transducer is a passive sensor that receives all operating power from the connected HELIX 7 display unit, so it generates no measurable heat of its own during continuous use.
Which HELIX 7 display units must I already own for this XNT 9 HW MSI 150 T to function?
It connects directly to HELIX 7 CHIRP MSI GPS G3, G3N, G4 or G4N models; no other display or adapter is required.
Will the 20-foot cable on this transducer reach the mounting point on my older HELIX 5 installation?
The connector is keyed for the HELIX 7 series only, so it cannot be plugged into a HELIX 5 or any earlier display.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Samsung MCR-SMC Motion Detection Sensor for DVM S and CAC Wind-Free 4-Way Cassettes
- Sensors



