WUQ
WUQ Portable Fish Finder 2.4in TFT 200kHz 45° 328ft 26ft Wired Sensor
Detects depth, temperature and fish size with a 2.4in colour screen, 200kHz sonar, 45° beam, 328ft range and 26ft wired sensor
- TypeAccessories
- 4-inch TFT color LCD shows underwater contour clearly
- 200 kHz sonar with 45° beam angle detects fish up to 328 ft deep
- Wired sensor gives 26 ft operating range from kayak or boat
- Rechargeable battery runs about 5 hours per full charge
- Adjustable brightness and multiple display modes suit day or night use
Portable 2.4 inch TFT fish finder
This handheld sonar unit shows water depth, temperature, bottom contour and fish size on a colour screen. It operates in transducer mode for real fishing or simulation mode for practice. The rechargeable battery runs for about five hours per charge. A mounting bracket secures the wired sensor to a kayak or boat.
Wired sensor limits at 26 ft and 45° beam
The transducer connects by a 26 ft cable, fixing the maximum horizontal reach from the display. Its 45° beam angle at 200 kHz narrows the coverage cone directly beneath the sensor. Depth readings stop at 328 ft, so deeper water returns no data. Buyers needing longer cable runs or wider scanning angles cannot use this unit.
328 ft maximum depth detection
The single specification that decides fit is the 328 ft depth ceiling. If your fishing grounds exceed this limit, the finder will not report bottom or fish signals. Within that range it delivers contour, temperature and fish-size data on a 2.4 inch screen with adjustable brightness for day or night use.
Highlights
- 4-inch TFT color LCD shows underwater contour clearly
- 200 kHz sonar with 45° beam angle detects fish up to 328 ft deep
- Wired sensor gives 26 ft operating range from kayak or boat
- Rechargeable battery runs about 5 hours per full charge
- Adjustable brightness and multiple display modes suit day or night use
Specifications
| Type | Accessories |
|---|
Questions about this item
How do I choose between the transducer and simulation modes on this fish finder?
Use simulation mode to test all functions without the sensor, then switch to transducer mode when you are on the water for live depth, temperature and fish-size readings.
What does the 328ft depth detection actually show me on the boat?
The unit will display bottom contour, water depth, temperature and fish icons down to 328ft, with a 45° beam angle at 200kHz.
How does the 200kHz frequency and 45° beam angle affect what I see?
The 200kHz transducer with a 45° beam covers a cone under the sensor, giving detailed returns for depth, structure and fish size within that zone.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



