WUQ
WUQ M12-3 TPMS 4 sensors 0-87 PSI solar charge
Monitors tyre pressure from 0 to 87 PSI with solar charging, five alarms and four sensors
- Typecar
- Solar charging extends monitor runtime without cables
- Five alarm modes warn of pressure and temperature issues
- Auto sleep after 10 minutes saves sensor battery life
- Backlight adjusts automatically for clear reading in any light
- Sensors swap positions on the display without reinstallation
RV tyre pressure monitor with four sensors
The WUQ M12-3 system monitors pressure from zero to 87 PSI across four wheels. A solar panel on the display unit keeps the internal battery topped up, with AC or DC charging as a backup. It is aimed at RV owners and trailer drivers who want continuous pressure data without frequent cable charging.
Upgrade from basic warning lights
Factory low-pressure lights only trigger after a large drop. This kit adds high-pressure, high-temperature, rapid-leak and sensor-battery alerts with user-set thresholds at plus 25 per cent and minus 15 per cent of the reference pressure. The jump is worth it when you need early warning on heavy loads or long highway stretches.
Fits a tow-vehicle dashboard
The display mounts on the dash and pairs with four external sensors that screw onto valve stems. Sensors swap positions in the menu without physical reinstallation when tyres are rotated. Auto sleep activates after 10 minutes of no motion and wakes on vibration, reducing battery drain during stops.
Highlights
- Solar charging extends monitor runtime without cables
- Five alarm modes warn of pressure and temperature issues
- Auto sleep after 10 minutes saves sensor battery life
- Backlight adjusts automatically for clear reading in any light
- Sensors swap positions on the display without reinstallation
Specifications
| Type | car |
|---|
Questions about this item
What size valve stems do the four external sensors screw onto?
The sensors are standard external units that thread onto typical Schrader valve stems found on most car, trailer and RV wheels.
How do I pair each sensor to its wheel position on the M12-3 monitor, and what is the common mistake?
Install sensors one at a time; the monitor automatically sets the current pressure as the reference value. The common mistake is fitting all four sensors before pairing, which prevents the system from learning each position.
When will the four sensors need replacement, and what indicates a dying sensor battery?
Sensors have a maximum working life of 2 years. A dedicated low-battery alarm on the monitor warns when a sensor battery is running low.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



