We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Handheld oscilloscope multimeter with 2.4in colour screen

WUQ

WUQ Handheld Oscilloscope Multimeter 10MHz 50MSa/s 6000 Counts 2.4in Colour Screen

SKU CH-FG9Z-JMRAY

Combines a 10 MHz oscilloscope with a 6000-count multimeter, 50 MSa/s sampling, 2.4 in colour screen and 100 data plus 10 waveform storage

  • TypeTest Instrument & Gauge Parts
  • 2-in-1 oscilloscope and multimeter saves bench space
  • 10 MHz bandwidth with 50 MSa/s sampling captures fast signals
  • 6000-count display gives precise multimeter readings
  • 4 inch colour screen shows live and stored waveforms together
  • Dual 750 mA and 10 A fuses protect the instrument

2-in-1 Handheld Oscilloscope Multimeter

The WUQ handheld instrument combines a 10MHz bandwidth oscilloscope with a 6000-count digital multimeter in one portable unit. It suits technicians and hobbyists who need both waveform viewing and standard electrical measurements on site.

Bundled Accessories and Software Impact

Three 1.5V AA batteries are included so the device works immediately without a separate power source. The firmware stores up to 100 data sets and 10 waveforms, and provides automatic, conventional and single waveform scanning modes plus a one-touch auto-set function.

Practical Limits of 10MHz Bandwidth

The 10MHz analog bandwidth and 50MSa/s maximum sampling rate restrict accurate signal analysis to lower-frequency applications such as audio, automotive sensors and basic power electronics. Overload protection uses a 750mA fuse and a 10A fuse, and the unit enters sleep mode after 15 minutes of inactivity.

Highlights

  • 2-in-1 oscilloscope and multimeter saves bench space
  • 10 MHz bandwidth with 50 MSa/s sampling captures fast signals
  • 6000-count display gives precise multimeter readings
  • 4 inch colour screen shows live and stored waveforms together
  • Dual 750 mA and 10 A fuses protect the instrument

Specifications

TypeTest Instrument & Gauge Parts

Questions about this item

What fuses protect the multimeter inputs and how often do they need changing?

The unit uses a 750mA fuse and a 10A fuse for overload protection; replace only when a fuse blows during use.

How long can the oscilloscope capture signals at the full 50MSa/s rate before memory fills?

Internal storage holds 100 data sets and 10 waveforms; sustained high-speed captures will fill this buffer quickly.

What is the typical battery life when the colour screen and oscilloscope run continuously?

Powered by three 1.5V AA cells with auto-sleep after 15 minutes of inactivity; continuous operation will drain them in a few hours.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.