WUQ
WUQ Depth Transducer 200KHz 20° Temp Skimmer 000-0106-48
A 200 kHz depth transducer with 20° beam angle and temperature sensor for transom mounting
- TypeAccessories
- Accurate depth readings from 200 kHz sonar
- Wide 20° beam angle covers more water column
- Built-in temperature sensor adds water-temp data
- Transom-mount Skimmer installs without hull penetration
- 20039 cable with Uni-plug connects to compatible displays
Depth Transducer 200 kHz 20° Beam
The WUQ depth transducer operates at 200 kHz with a 20° beam angle for precise bottom tracking. It includes a built-in temperature sensor so water temperature reads directly on the display. The transom-mount Skimmer design keeps the unit in clean water flow while underway. A 20039 cable with Uni-plug connector links the transducer to the sounder module.
Suited for Single-Frequency Sounders
This transducer suits boats that run a 200 kHz sounder and want temperature data without a through-hull installation. The 20° cone covers a focused area directly beneath the transom, ideal for shallow to mid-depth fishing. Builders who need dual-frequency operation, a wider cone angle or a through-hull mount should look at alternative transducers.
Cable and Connector Ready to Fit
The supplied 20039 cable terminates in a Uni-plug connector that mates with compatible Lowrance sounders. No splicing or adapter kits are required for a standard installation. The fixed cable length determines routing options, so verify the run from transom to display before mounting. The temperature sensor is integrated into the housing, adding no extra wiring.
Highlights
- Accurate depth readings from 200 kHz sonar
- Wide 20° beam angle covers more water column
- Built-in temperature sensor adds water-temp data
- Transom-mount Skimmer installs without hull penetration
- 20039 cable with Uni-plug connects to compatible displays
Specifications
| Type | Accessories |
|---|
Questions about this item
Does the 20039 cable with Uni-plug connector plug directly into my existing Lowrance display?
The Uni-plug connector is designed for Lowrance units that accept this interface; verify your display has a matching Uni-plug port before installation.
Will the 20° beam angle at 200KHz give similar coverage to an existing transducer on the same bracket?
A 20° beam at 200KHz produces a narrower cone than wider-angle or lower-frequency transducers, so bottom coverage will differ even when mounted on the same bracket.
How can I confirm the temperature sensor is working after mounting the skimmer transducer?
After power-up, check the display for a water-temperature reading; a live value that changes with conditions confirms the sensor is functioning.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
