WUQ
WUQ CMXCESM281 1000A 12V Jump Starter Power Station
A 3-in-1 unit combines a 1000-amp jump starter, a 12-volt DC outlet with four USB ports, and an LED work light for vehicles
- Typecar
- Jump starts V8 engines with 1000 peak amps
- Powers devices via four USB ports and 12 V DC outlet
- Built-in LED work light adds emergency illumination
- Reverse hook-up protection prevents damage from wrong connections
- Heavy-duty metal clamps grip battery terminals securely
Jump Starter for V8 Engines
The WUQ CMXCESM281 combines a 1000 peak amp jump starter, a 12 volt DC outlet, four USB ports and an LED work light in one unit. Its internal AGM battery delivers enough cranking power to start V8 engines across cars, trucks, SUVs, motorcycles, boats and ATVs. It works with standard, AGM, gel and deep-cycle battery types.
Replaces Separate Booster and Charger
This 3-in-1 device removes the need to carry a dedicated jump pack, a USB power bank and a work lamp. The jump is worth it when you want a single tool that can start a dead 12 volt battery and then recharge phones, tablets or 12 volt accessories from the same unit. Reverse hook-up protection guards the clamps against damage from incorrect connections.
Limited by Internal AGM Capacity
The 12 volt AGM battery stores a finite amount of energy, so repeated jump starts or extended USB charging will deplete it until the unit is recharged via the included 12 volt adapter. Heavy-duty metal clamps reach awkward terminals, but the peak 1000 amp output is only available while the internal battery holds sufficient charge. Users needing unlimited runtime must recharge between uses.
Highlights
- Jump starts V8 engines with 1000 peak amps
- Powers devices via four USB ports and 12 V DC outlet
- Built-in LED work light adds emergency illumination
- Reverse hook-up protection prevents damage from wrong connections
- Heavy-duty metal clamps grip battery terminals securely
Specifications
| Type | car |
|---|
Questions about this item
What battery type does the CMXCESM281 use and how is it mounted?
The unit contains a built-in 12 volt high-output AGM battery that is sealed inside the housing; no separate battery mounting is required.
How do I connect the clamps for a jump start and what mistake should I avoid?
Attach the red clamp to the positive terminal and the black clamp to the negative terminal; the reverse hook-up protection will alert you if the clamps are reversed, preventing damage.
When will the internal AGM battery need replacement and how is it serviced?
The sealed AGM battery is not user-replaceable; when it no longer holds a charge after repeated cycles the entire unit must be replaced.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



