WUQ
WUQ BA301 6V 12V Battery Tester 100-2000 CCA car electronics accessory
Tests 6 V and 12 V lead-acid or lithium batteries from 100 to 2000 CCA with 99.96 % accuracy and checks starter and alternator function
- TypeCar Charger
- Tests 6 V and 12 V lead-acid batteries from 100 to 2000 CCA
- Checks lithium starting batteries for accurate health data
- 96 % accuracy via advanced conductivity technology
- One-click waveform graphs voltage during cranking
- Tests starter and alternator to pinpoint charging faults
6V and 12V battery tester for 100-2000 CCA
The BA301 works on 6V and 12V lead-acid batteries from 100 to 2000 CCA, covering regular flood, AGM flat, AGM spiral, GEL and EFB types. It also supports lithium starting batteries, making it suitable for cars, motorcycles, trucks, SUVs, RVs, ATVs, boats and yachts. Advanced conductivity technology and intelligent chips deliver up to 99.96% accuracy when measuring cold cranking performance, health state and ageing degree.
One-key waveform analysis and system tests
A single “Waveform” click plots voltage changes during ignition, showing current-voltage, maximum and minimum voltage on a graph for real-time fault tracking. The tool also tests the starter and alternator, identifying abnormal starting and charging conditions. Professional advice is generated from the measured data so you can decide whether to charge or replace the battery without visiting a repair shop.
For owners and shops needing broad voltage coverage
This tester suits users who need both 6V and 12V capability across a wide CCA range and multiple battery chemistries, including lithium starters. Buyers who only test a single voltage or a narrower CCA window may find a simpler device adequate. Those requiring integrated printing or wireless data export should look at other models.
Highlights
- Tests 6 V and 12 V lead-acid batteries from 100 to 2000 CCA
- Checks lithium starting batteries for accurate health data
- 96 % accuracy via advanced conductivity technology
- One-click waveform graphs voltage during cranking
- Tests starter and alternator to pinpoint charging faults
Specifications
| Type | Car Charger |
|---|
Questions about this item
How high a cold-cranking-amp rating can the BA301 test before it hits its upper limit?
The tester handles lead-acid batteries rated from 100 up to 2000 CCA, so the ceiling is 2000 CCA.
Does the BA301 get hot or noisy during a full day of back-to-back battery and alternator checks?
The handheld analyzer has no fan or moving parts, so it runs silently and stays cool even with continuous use.
What power source does the BA301 need — does it plug into mains or run from the vehicle battery?
It draws operating power directly from the 6 V or 12 V battery under test, so no separate charger or mains adapter is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



