WUQ
WUQ 48 Amp Level 2 EV Charger J1772 NACS 30ft Cable
48-amp Level 2 charger with J1772 connector, NACS adapter, 30 ft cable and 2.4 in display for indoor or outdoor use
- TypeAmplifier & Processor Remotes
- Charges up to 48 amps for faster EV refuelling
- Works with J1772 vehicles and Tesla via included NACS adapter
- 30-foot cable reaches distant parking spots easily
- Installs on 200-240V hardwire or NEMA 14-50 outlet
- 4-inch LED panel plus app shows real-time energy use
Universal EV Charging Solution
The WUQ 48 Amp Level 2 EV Charger serves every electric vehicle on US roads with a J1772 connector and included NACS adapter. It delivers up to 48 amps through a 30ft cable for home or public parking use. The unit mounts indoors or outdoors in a weather‑proof enclosure with an integrated cable holder and anti‑theft hardware.
Upgrade from Lower‑Power Units
This station replaces 14 amp or 24 amp chargers when a 50A breaker and 200‑240V supply are available. The jump is worth it for drivers who need faster overnight replenishment and want Bluetooth plus Wi‑Fi connectivity with a 2.4 in LED display. Two RFID cards and a mobile app add access control and session tracking.
Capacity and Headroom
At 48 amps the charger comfortably handles daily commuting top‑ups and longer road‑trip preparation for most current EVs. It runs out when the vehicle’s onboard charger accepts less than the full 48 amps or when the electrical service cannot sustain a 50A circuit. Hard‑wire or NEMA 14‑50 plug options give installation flexibility.
Highlights
- Charges up to 48 amps for faster EV refuelling
- Works with J1772 vehicles and Tesla via included NACS adapter
- 30-foot cable reaches distant parking spots easily
- Installs on 200-240V hardwire or NEMA 14-50 outlet
- 4-inch LED panel plus app shows real-time energy use
Specifications
| Type | Amplifier & Processor Remotes |
|---|
Questions about this item
What breaker size and voltage does the 48 amp charger require for installation?
The unit needs a 50 A breaker on a 240 V circuit, supplied through the included NEMA 14-50 plug or by hardwiring with the kit in the box.
Which step do installers most often miss when mounting the station?
Forgetting to fit the anti-theft bolts and cable-holder brackets that secure the 30 ft cord to the frame before first use.
How often should the J1772 connector and NACS adapter be inspected or replaced?
Check both connectors every 24 months for wear, debris or damaged pins; replace either piece if the latch no longer clicks securely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



