We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

WUQ

WUQ 30ft 40amp J1772 EV Extension Cord car electronics accessory

SKU CH-XPVC-YM3T1

Extends a J1772 charger by 30 ft at 40 amps continuous with UL-listed parts, IP65 rating, ultra-flex cable that stays pliable in cold, and a carrying bag

  • TypeAmplifier & Processor Remotes
  • Extends any SAE J1772 charger reach by 30ft
  • Handles 40amp continuous charging indoors or outdoors at IP65
  • Ultra-flexible USA-made cable stays pliable in cold weather
  • All connector pins machine crimped for maximum conductivity
  • Includes lightweight carrying bag for portable storage

30ft J1772 EV Extension Cord

This 30ft SAE J1772 extension cord adds reach between a fixed charging station and the vehicle inlet. It supports 40 amp continuous current for Level 1 and Level 2 charging. The ultra-flexible cable remains pliable in cold weather and includes a carrying bag for portable use. It is built in the USA with UL recognised components and rated IP65 for indoor or outdoor service.

Replaces shorter fixed cables

The extension replaces the limited reach of a permanently installed station cord when the vehicle parks farther away. It bridges gaps of two to three vehicle lengths so the station plug connects to the extension receptacle and the extension plug connects to the car. The upgrade is worth it when the existing cable cannot span the distance without strain or when a portable solution is needed for multiple parking spots.

Sustained 40 amp load handling

All connector pins are machine crimped for consistent conductivity and mechanical strength under continuous 40 amp draw. The USA-made ultra-flex cable and UL 62 listed construction resist heat buildup during long charging sessions. IP65 rated parts withstand rain and dust without degradation, though the assembly must not be submerged in water.

Highlights

  • Extends any SAE J1772 charger reach by 30ft
  • Handles 40amp continuous charging indoors or outdoors at IP65
  • Ultra-flexible USA-made cable stays pliable in cold weather
  • All connector pins machine crimped for maximum conductivity
  • Includes lightweight carrying bag for portable storage

Specifications

TypeAmplifier & Processor Remotes

Questions about this item

What length and amperage rating does this 30ft J1772 extension cord have?

This cord is 30ft long and rated for 40 amp continuous use with J1772 connectors.

How do you connect this extension cord to an existing EV charger and vehicle?

Plug the charger's J1772 connector into the cord's receptacle, then plug the cord's J1772 connector into the vehicle.

Will the ultra-flex cable remain easy to coil after years of outdoor use?

The USA-made ultra-flex cable is designed not to stiffen in cold weather, so it should coil easily over time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.