We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Handheld 4.3 inch touchscreen oscilloscope multimeter signal generator in carrying case

WUQ

WUQ 2C53P Plus 3-in-1 Oscilloscope Multimeter Signal Generator 50MHz 250MS/s 4.3in Touchscreen 4000mAh

SKU CH-HDP0-11X85

A 2-channel 50 MHz oscilloscope, 19999-count multimeter and 10 MHz signal generator in one 4.3-inch touchscreen unit with 4000 mAh battery

  • TypeTest Instrument & Gauge Parts
  • 3-in-1 oscilloscope, multimeter and signal generator saves bench space
  • 2-channel 50 MHz bandwidth with 250 MS/s capture rate reveals fast signals
  • 3-inch IPS touchscreen 480×272 resolution enables direct waveform control
  • 4000 mAh battery delivers 4 hours portable operation per charge
  • 4½-digit 19999-count multimeter measures voltage, current, capacitance, resistance, diode, continuity and temperature

3-in-1 Portable Test Instrument

The WUQ 2C53P Plus combines a two-channel oscilloscope, a digital multimeter and a DDS signal generator in one handheld tablet. It targets technicians and hobbyists who need bench-level measurement, signal generation and waveform analysis in a single battery-powered unit for field or bench work.

Build Integration and Power

The 4.3 inch IPS touchscreen with 480 by 272 resolution replaces separate displays and keyboards, freeing bench space and reducing cable clutter. A 4000 mAh battery delivers four hours of continuous operation, so the instrument can move between a vehicle, a workbench and a test point without mains power.

Bundled Accessories and Software Impact

The included carrying case protects the tablet, probes and leads during transport and keeps all three functions organised for rapid deployment. On-board analysis tools such as afterglow, FFT spectrum analysis, cursor measurement and Lissajous display let users inspect signal frequency content and timing directly on the device.

Highlights

  • 3-in-1 oscilloscope, multimeter and signal generator saves bench space
  • 2-channel 50 MHz bandwidth with 250 MS/s capture rate reveals fast signals
  • 3-inch IPS touchscreen 480×272 resolution enables direct waveform control
  • 4000 mAh battery delivers 4 hours portable operation per charge
  • 4½-digit 19999-count multimeter measures voltage, current, capacitance, resistance, diode, continuity and temperature

Specifications

TypeTest Instrument & Gauge Parts

Questions about this item

How long can the 4000mAh battery run the 4.3in touchscreen before a recharge?

The built-in 4000mAh battery provides about 4 hours of continuous use on a full charge.

Does the FPGA plus MCU architecture keep the 50MHz scope cool during all-day capture?

The FPGA+MCU+ADC hardware design protects the unit from overheating during sustained operation.

What voltage range must my probes handle for the multimeter's 19999-count mode?

The multimeter measures up to ±400V, so probes rated for at least that voltage are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.