WRIARICH
WRIARICH USB4 Extension Cable 1.64FT 0.5M Gray
Extends USB-C connections by 1.64 ft while delivering 100 W power, 40 Gbps data and 8K@60 Hz video
- Connector TypeUSB C to USB C
- ColorGray
- Thunderbolt 3Yes
- Extend your USB-C port while keeping full 40Gbps speed
- Charge devices up to 100W with Power Delivery support
- Drive an 8K display at 60Hz or dual 4K at 60Hz
- Works with Thunderbolt 3 and 4 devices plus older USB standards
- Compact 1.64ft length adds reach without clutter
USB4 extension cable 0.5 m
The WRIARICH USB4 extension cable adds 1.64 ft of reach between USB-C hosts and peripherals. It supports Thunderbolt 3 and 4 devices, external SSDs, docks, eGPUs and PD chargers. The cable is built for users who need extra length without losing 40 Gbps throughput or 100 W charging capability.
Replaces short factory cables
It upgrades from the brief cables that ship with docks, monitors and drives when the host port is out of reach. The jump is worth it when a workstation layout demands routing behind a desk or through a cable channel while keeping full 8K 60 Hz video bandwidth and 40 Gbps data rates intact.
Plug-and-play female-to-male
The male plug connects to the host and the female receptacle accepts the existing device cable, requiring no drivers or configuration. The only common issue is accidentally exceeding the 0.5 m specification by chaining multiple extenders, which can degrade signal integrity and reduce charging performance.
Highlights
- Extend your USB-C port while keeping full 40Gbps speed
- Charge devices up to 100W with Power Delivery support
- Drive an 8K display at 60Hz or dual 4K at 60Hz
- Works with Thunderbolt 3 and 4 devices plus older USB standards
- Compact 1.64ft length adds reach without clutter
Specifications
| Connector Type | USB C to USB C |
|---|---|
| Color | Gray |
| Thunderbolt 3 | Yes |
Questions about this item
What length and connector style does this USB4 extension cable use?
The cable is 1.64FT (0.5M) long and uses a USB C male to USB C female connector arrangement.
How do I install the cable to get 40Gbps and 100W charging without signal loss?
Plug the male end directly into the host port and the device into the female end; avoid daisy-chaining extra adapters or the 40Gbps and 100W PD ratings will not be maintained.
Will the Thunderbolt 3 and 4 compatibility require any firmware updates or active components later?
No firmware or active electronics are involved; the passive cable maintains Thunderbolt 3 and 4 performance for its lifetime unless physically damaged.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



