We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SATA power splitter cable with one male and five female connectors, 24 inch total length

WRIARICH

WRIARICH SATA Power Splitter Cord 1 Male to 5 Female 24-inch 60cm 18AWG

SKU CH-EXVM-SYC97

Splits one 15-pin SATA power connector into five to run multiple drives from a single supply rail, using 18 AWG wire rated for 3.3 V, 5 V and 12 V across a 60 cm length

  • TypeSATA Cable
  • ColorBlack
  • Connector Detail15 Pin SATA Power Extension Hard Drive Cable 1 Male to 5 Fem
  • Terminal GenderMale to Female
  • Connects five SATA drives from one power connector
  • 24-inch total length with staggered 8- and 4-inch segments
  • 18 AWG tin-coated copper supports 3.3 V, 5 V and 12 V rails
  • Works with 2.5" SSDs, 3.5" HDDs and optical drives
  • Includes self-adhesive tape for tidy cable routing

Five-drive SATA power splitter

This 15-pin SATA power splitter turns one male connector into five female ports, letting a single PSU lead feed multiple drives. It suits builders who need extra power connections for 2.5" SSDs, 3.5" HDDs, CD, DVD or Blu-ray drives and PCIe express cards. The 18 AWG tin-coated copper conductors carry 3.3 V, 5 V and 12 V without performance loss. Not for devices lacking a native SATA power port.

Cable layout and thermal profile

Total length is 24 inches, divided into an 8-inch lead followed by four 4-inch branches, so drives can be spaced along the run. The 1007-specification 18 AWG wire handles normal drive currents with minimal voltage drop and heat rise. No active cooling or fan is involved; the cable runs passively and silently inside the chassis. Self-adhesive tape is included for securing the cable run.

Bundled tape and compatibility note

One piece of self-adhesive tape ships with the splitter for tidy routing. The manufacturer stresses that the adapter works only with equipment that has a standard SATA power port; connecting it to incompatible ports will damage components. No driver, firmware or software is supplied or required.

Highlights

  • Connects five SATA drives from one power connector
  • 24-inch total length with staggered 8- and 4-inch segments
  • 18 AWG tin-coated copper supports 3.3 V, 5 V and 12 V rails
  • Works with 2.5" SSDs, 3.5" HDDs and optical drives
  • Includes self-adhesive tape for tidy cable routing

Specifications

TypeSATA Cable
ColorBlack
Connector Detail15 Pin SATA Power Extension Hard Drive Cable 1 Male to 5 Female
Terminal GenderMale to Female

Questions about this item

How do I install the 15-pin SATA male-to-5-female splitter and which step do people often miss?

Plug the single 15-pin male connector into the PSU SATA power lead, then attach each of the five female heads to your drives; the step often missed is verifying every device uses a genuine SATA power port before connecting.

What maintenance or replacement will the 18AWG 1007 cable need over time?

Inspect the black 18AWG 1007 wiring and 15-pin connectors periodically for cracked insulation, corroded pins or loose crimps; replace the whole 60 cm splitter if any conductor shows damage.

What limit appears first when five drives draw 3.3 V, 5 V and 12 V continuously through the 24-inch splitter?

The combined current capacity of the single 18AWG 1007 feed and the PSU SATA rail becomes the bottleneck before individual drive limits are reached.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.