WRIARICH
WRIARICH DisplayPort 1.4 cable 3.3 ft 8K 60Hz 4K 144Hz 32.4 Gbps
A 3.3 ft DisplayPort 1.4 cable carries 8K at 60 Hz and 4K at 144 Hz over a 32.4 Gbps link
- ColorBlack
- Length3.3 ft.
- Cable Length3.3 ft.
- Connector Number1
- Connect From1 x DisplayPort 1.4
- Connect To1 x DisplayPort 1.4
- 8K 7680×4320 at 60 Hz for ultra-sharp visuals
- 4K 3840×2160 at 144 Hz for smooth high-refresh gaming
- 4 Gbps bandwidth handles HDR 10-bit 4:4:4 colour
- Double-shielded solid copper conductors ensure stable signal over 3.3 ft
- Male-to-male DisplayPort 1.4 connectors plug straight into PC and monitor
WRIARICH DisplayPort 1.4 cable 3.3 ft
This WRIARICH DisplayPort 1.4 cable carries 32.4 Gbps over a 3.3 ft male-to-male link. It supports 8K at 60 Hz and 4K at 144 Hz with 10-bit colour and HDR. The double-shielded solid copper conductor aims for stable, loss-free transmission. It is built for users who need a reliable high-bandwidth connection between a DP source and a compatible display.
Who this suits and who should look elsewhere
The cable suits PC and laptop owners driving 8K or high-refresh 4K monitors, projectors or HDTVs that accept DisplayPort 1.4 signals. It works for multi-stream transport setups and stereoscopic 3D where the host and screen both support those modes. Buyers whose devices only offer HDMI, USB-C or older DisplayPort versions cannot use this cable. Users needing longer runs or angled connectors should consider other options.
Deciding specification: 32.4 Gbps DisplayPort 1.4
The single figure that decides fit is the 32.4 Gbps bandwidth of the DisplayPort 1.4 link. This throughput enables 7680x4320 at 60 Hz, 3840x2160 at 144 Hz and 2560x1440 at up to 165 Hz with full 10-bit RGB 4:4:4 and HDR. If the source and display both support DisplayPort 1.4 at that rate, the cable will pass the signal. If either end is limited to a lower version, the maximum resolution and refresh rate will drop accordingly.
Highlights
- 8K 7680×4320 at 60 Hz for ultra-sharp visuals
- 4K 3840×2160 at 144 Hz for smooth high-refresh gaming
- 4 Gbps bandwidth handles HDR 10-bit 4:4:4 colour
- Double-shielded solid copper conductors ensure stable signal over 3.3 ft
- Male-to-male DisplayPort 1.4 connectors plug straight into PC and monitor
Specifications
| Brand | LUOM |
|---|---|
| Model | T0303 |
| Color | Black |
| Length | 3.3 ft. |
| Cable Length | 3.3 ft. |
| Connector Number | 1 |
| Connect From | 1 x DisplayPort 1.4 |
| Connect To | 1 x DisplayPort 1.4 |
| Terminal Gender | Male to Male |
| Speed | Test |
| Shielding | Double-shielded |
| Conductor | Solid Copper Conductor |
| Construction | test123 |
| Sound Quality | Production Test |
Questions about this item
How much clearance does the 3.3 ft cable need behind a monitor?
The cable is 3.3 ft long with male DisplayPort 1.4 connectors on both ends, so allow space for the plug depth and the braided jacket bend radius behind the display.
What is the correct way to plug in the male-to-male DisplayPort 1.4 cable?
Either end can connect to the source or display because the connectors are identical; a common mistake is forcing the latch the wrong way — press the release button before pulling it out.
When should the double-shielded copper cable be replaced?
Replace it if the braided jacket frays, the latch tabs break, or you see signal drop-outs at 8K 60 Hz or 4K 144 Hz that disappear with a known-good cable.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



