WORKPRO DC Soldering Iron Kit 40W 3 Tips BC210-K I JB OLED PD QC
A 40-watt DC soldering iron kit with OLED display, PD/QC power support, and three interchangeable tips for electronics repair
- Watts40 watts
- Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
- Accurate DC temperature control protects sensitive components
- 6-second heat-up from cold to working temperature
- Three interchangeable tips swap without tools via click-in design
- OLED display shows real-time temperature and power readout
- Powers from PD, QC, AFC or FCP sources
DC Soldering Kit for Electronics Repair
The WORKPRO DC soldering iron kit is built for technicians and hobbyists who repair circuit boards, assemble prototypes or craft jewellery. It runs from any USB-C power source that supports PD, QC, AFC or FCP protocols, so a power bank or laptop charger is enough to get started. Buyers who need a bench iron fed from mains AC or a high-wattage station for heavy connectors will not find that capability here.
40 W Peak Power with 6-Second Heat-Up
Maximum output reaches 40 watts and brings the tip to working temperature in roughly six seconds. The adjustable range spans 356896 to 180480 (units as supplied) and the OLED display shows live temperature and power readings. Without a compatible PD or QC adapter the iron cannot deliver its rated performance, so the power source is the single specification that decides suitability.
Tool-Free Tip Swaps and Auto Sleep
Three tips — BC210-K, BC210-I and BC210-JB — click into place horizontally without tools, making changes fast during multi-joint jobs. The handle includes a calibration function, sleep timer and memory recall to keep settings consistent. The most common issue is using an under-rated USB-C supply that cannot sustain the negotiated voltage, which causes the iron to throttle or shut down mid-task.
Highlights
- Accurate DC temperature control protects sensitive components
- 6-second heat-up from cold to working temperature
- Three interchangeable tips swap without tools via click-in design
- OLED display shows real-time temperature and power readout
- Powers from PD, QC, AFC or FCP sources
Specifications
| Watts | 40 watts |
|---|---|
| Compatibility/Fitment | Out-Opening, Narrow Stile, Store Front Doors |
Questions about this item
How does the 40 W rating translate to real-world heating speed?
The iron reaches peak temperature in six seconds from cold, giving you a ready-to-use tool almost instantly.
Which DC power protocols does the iron accept and what do they limit?
It negotiates PD, QC, AFC and FCP, automatically drawing the optimal power each protocol allows to keep temperature stable.
What is required to swap the BC210-K, BC210-I or BC210-JB tips?
No tools are needed; slide the new tip in horizontally until it clicks into place.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
