We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Fluorescent green hi-vis parka size 4XL with detachable hood and storm flap

Work King

Work King 42631 High-Visibility Parka 4XL Personal Protective Equipment

SKU CH-JXT0-QQJGJ

High-visibility parka with ANSI Class 3 certification, 300D polyurethane-coated polyester shell, detachable hood and removable quilted liner for cold conditions

  • MaterialHAWA
  • ANSI Class 3 Type R certified for high-visibility compliance
  • 300-denier polyurethane-coated polyester shell resists wind and rain
  • Removable quilted liner adds warmth in cold conditions
  • Detachable hood adapts to changing weather
  • Chest fits 55 to 57 inches for 4XL sizing

High-Visibility Parka for Cold Conditions

The Work King 42631 parka meets ANSI 107-2015 Type R Class 3 requirements for high-visibility safety apparel. It is built from 300 denier polyester oxford with a polyurethane coating and includes a detachable hood. The fluorescent green colour and reflective trim help workers remain seen in low-light or high-traffic environments.

Weather Protection and Thermal Layering

A zipper front with a storm flap seals out wind and rain while the PU-coated shell repels moisture. The removable quilted polyester liner adds insulation for cold conditions and can be taken out when temperatures rise. This two-piece system lets the wearer adjust warmth without changing garments.

Fit Range and Layering Limits

The parka fits chest measurements from 55 to 57 inches in a 4XL cut. Workers needing a smaller or larger chest range will need a different size. Buyers who require inherent flame-resistant fabric or a non-detachable hood should look elsewhere.

Highlights

  • ANSI Class 3 Type R certified for high-visibility compliance
  • 300-denier polyurethane-coated polyester shell resists wind and rain
  • Removable quilted liner adds warmth in cold conditions
  • Detachable hood adapts to changing weather
  • Chest fits 55 to 57 inches for 4XL sizing

Specifications

BrandWORK KING
MaterialHAWA

Questions about this item

How do I secure the storm flap over the zipper so wind doesn't bypass the front closure?

Zip the parka fully, then press each snap or hook on the storm flap from bottom to top so the overlap seals evenly; skipping the lowest fastener is the common mistake that leaves a draft gap.

When will the removable quilted polyester liner need replacing?

Replace the liner when the quilted stitching loosens, the polyester batting compacts and no longer lofts, or the shell fabric shows abrasion holes — typically after several cold seasons of daily wear.

At what chest measurement does the 4XL parka become too tight for layering?

The 4XL fits chests from 55 in to 57 in; once your layered clothing pushes you past 57 in the parka restricts movement and the high-visibility panels can gap.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.