We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 24-hour mechanical timer switch in clamshell packaging

Woods Ind.

Woods Ind. 24-Hour Mechanical Timer 59745WD White

SKU CH-4PBN-REY4X

Programmable 24-hour mechanical timer replaces a standard wall switch, controls lights, fans or heaters with manual override and non-removable pins, rated 125 V AC, 20 A resistive and 8 A tungsten

  • Color/FinishWhite
  • Programmable 24-hour schedule repeats daily for set-and-forget convenience
  • Manual override button lets you bypass the timer instantly
  • Pins are captive so they cannot be removed or lost
  • Replaces a standard wall switch and fits single or multi-gang boxes
  • Rated 125 V AC with 20 A resistive and 8 A tungsten loads

24-Hour Mechanical Timer for Lights and Fans

The Woods Ind. 59745WD is a programmable wall switch that turns overhead lights, ceiling fans, porch lighting or heaters on and off at set times. Settings repeat every 24 hours so the schedule runs automatically each day. A manual override button lets you toggle the load without changing the program. Pins are fixed in place so they cannot be removed or lost.

Check Voltage Load and Box Type Before Installing

The timer is rated for 125V AC at 60 Hz and fits a standard single or multi-gang electrical box. Resistive loads are supported up to 20A or 2500W. Tungsten and ballast loads are limited to 8A or 1000W. Motor loads up to 3/4 HP are also supported. Verify that your circuit and connected devices stay within these limits before wiring the unit.

Cool Running with No Fan Noise

The mechanical timer operates without a cooling fan so it adds no audible noise to the room. Normal power draw is minimal because the device only drives its internal clock motor and switching contacts. Heat output stays low during daily operation. The white finish matches a warm neutral colour palette for a clean appearance in standard wall plates.

Highlights

  • Programmable 24-hour schedule repeats daily for set-and-forget convenience
  • Manual override button lets you bypass the timer instantly
  • Pins are captive so they cannot be removed or lost
  • Replaces a standard wall switch and fits single or multi-gang boxes
  • Rated 125 V AC with 20 A resistive and 8 A tungsten loads

Specifications

Color/FinishWhite

Questions about this item

What comes inside the clamshell package and what must I supply myself?

The package contains the single white mechanical timer unit; you will need a standard single- or multi-gang electrical box and wire connectors to complete the installation.

How do I decide between the 20 A resistive and 8 A tungsten ratings for my load?

Use the 20 A / 2500 W resistive rating for heaters or incandescent lighting, and the 8 A / 1000 W tungsten rating for standard filament bulbs; match the rating to the actual load type you are switching.

What does the 24-hour repeat cycle mean for daily scheduling?

The timer repeats the same on/off pattern every 24 hours, so once you set the pins for a day the schedule runs automatically each following day without further adjustment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.