WoodOwl
WoodOwl 07833 Ultra Smooth Double Cut 24" x 1-1/4" pneumatic accessory
A 24-inch, 1-1/4-inch diameter auger bit with double-flute, double-cut design for clean, fast holes in deep wood boring
- Drills clean, circular holes fast with double flute, double cut design
- Reduces user fatigue and motor strain using proprietary high-carbon steel
- Balanced, wobble-free operation for precise drilling accuracy
- 24-inch length reaches deep work in timber framing and pole barns
- 7/16 quick-change shank speeds bit swaps on pneumatic tools
Ultra Smooth Double Cut Auger Bit
The WoodOwl 07833 is a 24-inch long, 1-1/4-inch diameter auger bit built for demanding woodworkers. It targets timber framers, pole barn builders, lineworkers and arborists who need to drill deep, clean holes quickly. The double flute, double cut design delivers performance similar to triple cut bits in extended lengths. A 7/16-inch quick-change shank fits compatible drill chucks for fast swaps.
Balanced Drilling Reduces User Fatigue
The bit is engineered to be balanced and wobble free so it tracks straight where you aim it. Proprietary high-carbon steel construction lessens strain on the tool motor and battery during extended use. This design helps reduce operator fatigue when drilling multiple deep holes in tough timber. Clean, circular holes result from the ultra-smooth cutting geometry.
Replaces Standard Bits For Deep Clean Holes
This accessory upgrades from shorter or single-flute bits that wander or clog in deep drilling. The jump is worth it when you need 24-inch reach with a 1-1/4-inch bore and minimal tear-out. It is not suited for jobs requiring smaller diameters, shorter lengths or non-wood materials. California Proposition 65 warnings apply for cancer and reproductive harm.
Highlights
- Drills clean, circular holes fast with double flute, double cut design
- Reduces user fatigue and motor strain using proprietary high-carbon steel
- Balanced, wobble-free operation for precise drilling accuracy
- 24-inch length reaches deep work in timber framing and pole barns
- 7/16 quick-change shank speeds bit swaps on pneumatic tools
Specifications
| Brand | WOODOWL |
|---|
Questions about this item
How do I fit the 7/16 quick-change shank into my drill, and what mistake should I avoid?
Insert the hex shank fully until it locks in the chuck; the common error is leaving it partially seated, which causes wobble and uneven holes.
What upkeep does the high-carbon steel bit need after repeated use?
Wipe resin off the flutes, apply light oil to prevent rust, and sharpen the cutting edges with a file when they dull.
At 24 inches overall length, what limits continuous drilling before the bit overheats or binds?
Deep holes trap chips; clear the flutes every few inches and pause to let the steel cool, otherwise the bit seizes in the workpiece.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
