We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass wall faucet with handwheel handle and anti-siphon

Woodford Manufacturing Company

Woodford Manufacturing Company 24P3/4 trap

SKU CH-BMH6-30AE7 MPN 24P3/4

A brass and copper angle sillcock with a 3/4 inch FNPT inlet, handwheel handle, 125 psi pressure rating, 120°F temperature limit, and built-in anti-siphon protection meeting ASSE.

  • TypeDrain Components
  • MaterialHAWA
  • Anti-siphon protection prevents backflow contamination
  • Brass and copper body resists corrosion
  • 125 psi rating handles high-pressure systems
  • 120°F maximum temperature suits hot water
  • ASSE, CSA and IAPMO compliance ensures code approval

Angle Sillcock with Anti-Siphon Protection

This brass and copper angle sillcock provides a reliable water shut-off point for residential and commercial plumbing installations. It features a 3/4 inch FNPT inlet connection and a handwheel handle for manual flow control. The integrated anti-siphon device prevents backflow contamination of the potable water supply. It meets ASSE, CSA, and IAPMO standards for plumbing safety and performance.

Pressure and Temperature Ratings for Normal Use

The valve is rated for a maximum working pressure of 125 psi and a maximum operating temperature of 120 degrees Fahrenheit. These ratings cover typical cold water supply conditions found in standard building systems. The brass and copper body construction resists corrosion during daily operation. The handwheel handle allows smooth opening and closing without excessive force.

Sustained Load Behaviour and Compliance

Under continuous pressure up to the 125 psi limit, the valve maintains a positive seal without leakage. The anti-siphon mechanism functions continuously to protect the water supply during extended periods of use. The body materials withstand the maximum rated temperature of 120 degrees Fahrenheit without degradation. A Proposition 65 warning applies regarding cancer and reproductive harm.

Highlights

  • Anti-siphon protection prevents backflow contamination
  • Brass and copper body resists corrosion
  • 125 psi rating handles high-pressure systems
  • 120°F maximum temperature suits hot water
  • ASSE, CSA and IAPMO compliance ensures code approval

Specifications

TypeDrain Components
MaterialHAWA
BrandWoodford Mfg.
Model24P3/4

Questions about this item

How do I install the 3/4 in FNPT inlet on the 24P3/4, and what step is often missed?

Thread the FNPT inlet into the supply fitting with pipe sealant, then tighten. The step often missed is verifying the anti-siphon vent faces downward so it can drain and prevent backflow.

What maintenance will the anti-siphon and handwheel on the 24P3/4 need later?

Inspect the anti-siphon vent annually for debris and test the vacuum breaker function. Lubricate the handwheel stem if it stiffens, and replace the internal seat washer if dripping appears at the spout.

At what temperature limit does the 24P3/4 body show stress first under sustained use?

The brass/copper body is rated to 120 Degrees F. Sustained operation above that temperature accelerates seal wear and can deform the anti-siphon components before the 125 psi pressure limit is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.