WMtec
WMtec H315ES-00 315W Server Power Supply 8Pin+4Pin+6Pin
315 W power supply for OptiPlex XE2, 9020, 7020 and 3020 SFF systems with 8-pin, 4-pin and 6-pin connectors
- Delivers 315 W to power OptiPlex SFF workstations
- Wide 100–240 V input suits global mains voltages
- Operates at 50–60 Hz for stable AC compatibility
- Includes 8-pin, 4-pin and 6-pin connectors for motherboard and GPU
- Direct replacement for Dell OptiPlex XE2, 9020, 7020 and 3020 SFF
Compatible OptiPlex SFF Power Supply
The WMtec H315ES-00 is a 315 Watt server power supply built for OptiPlex XE2 9020 7020 3020 small form factor desktops. It replaces part numbers 4FCWX and 04FCWX directly. This unit suits IT teams maintaining fleets of these specific SFF workstations.
315W Output With Wide-Range Input
The supply delivers a maximum of 315 Watt from a 100-240V 4.4A 50-60Hz input range. This wide-range design handles global mains voltages without a selector switch. In normal office use the fan runs at low speed, keeping acoustic output modest for quiet environments.
Proprietary 8Pin+4Pin+6Pin Connector Layout
The fixed cable harness provides an 8Pin, a 4Pin and a 6Pin connector arranged for the OptiPlex SFF motherboard. This pin-out matches the original chassis wiring exactly. Builders needing standard ATX 24-pin or additional PCIe cables cannot use this unit without adapters.
Highlights
- Delivers 315 W to power OptiPlex SFF workstations
- Wide 100–240 V input suits global mains voltages
- Operates at 50–60 Hz for stable AC compatibility
- Includes 8-pin, 4-pin and 6-pin connectors for motherboard and GPU
- Direct replacement for Dell OptiPlex XE2, 9020, 7020 and 3020 SFF
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the WMtec H315ES-00 PSU in an OptiPlex 7020 SFF and which cable routing mistake should I avoid?
Remove the chassis side panel, slide the unit into the dedicated bay until the latch clicks, then connect the 8-pin, 4-pin and 6-pin cables; the common error is leaving the 6-pin connector loose, which prevents the system from posting.
What maintenance will the WMtec H315ES-00 require after extended use?
Clean the intake vents and internal fan with compressed air every six to twelve months to prevent dust build-up that reduces airflow; the fan is the only moving part and cannot be lubricated, so replacement is needed if bearings become noisy.
Which limit appears first when the WMtec H315ES-00 runs at full 315 W load continuously?
The 315 W maximum output is the first hard limit; sustained loads at or above this level trigger over-current protection and shut the unit down, while the 100-240 V input range and 50-60 Hz frequency stay within spec.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



