We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver server PSU with 8-pin and 4-pin connectors

WMtec

WMtec H290AM-00 290W server power supply for OptiPlex 3020 7020 9020

SKU CH-H9E8-5D65V

A 290 watt replacement power supply with 8-pin motherboard and 4-pin CPU connectors, fitting Dell OptiPlex 3020, 7020 and 9020 tower models

  • Delivers 290 W to run OptiPlex 3020 7020 9020 reliably
  • Fits MT chassis with 150 85 140 mm dimensions
  • Powers motherboard via 8-pin and CPU via 4-pin connectors
  • Compatible with Precision T1700 and Inspiron 3670 workstations
  • Brand-new unit replaces H290AM-00 RVTHD AC290AM-00 JNPVV part numbers

Dell OptiPlex 3020 7020 9020 power supply

This 290 watt unit is a direct replacement for the H290AM-00 and related part numbers used in Dell OptiPlex 3020, 7020 and 9020 mini-tower systems. It also fits the Precision T1700 workstation and Inspiron 3670 desktop. The supply delivers standard motherboard and CPU power through an 8-pin and a 4-pin connector.

Replaces failed or noisy OEM units in listed

Swapping in this supply restores reliable power when the original unit fails, becomes loud or shows voltage instability. The upgrade is worth it when the existing PSU can no longer hold load or when a rebuild requires a fresh, new component with the correct pin-out and form factor.

290 watt capacity handles stock OptiPlex

The output comfortably runs the standard processor, memory, integrated graphics and typical office peripherals for the supported models. Headroom runs out when high-power discrete graphics cards or multiple drive arrays are added beyond the original system specification. Builders needing auxiliary PCIe power connectors or higher continuous current should look elsewhere.

Highlights

  • Delivers 290 W to run OptiPlex 3020 7020 9020 reliably
  • Fits MT chassis with 150 85 140 mm dimensions
  • Powers motherboard via 8-pin and CPU via 4-pin connectors
  • Compatible with Precision T1700 and Inspiron 3670 workstations
  • Brand-new unit replaces H290AM-00 RVTHD AC290AM-00 JNPVV part numbers

Specifications

No published specifications for this item yet.

Questions about this item

What are the 150 85 140mm dimensions for the H290AM-00 power supply?

The unit measures 150 mm wide, 85 mm tall and 140 mm deep, matching the standard MT chassis used by the OptiPlex 3020, 7020 and 9020.

Which power cables must be connected during installation of the H290AM-00?

Connect the 8-pin motherboard connector and the 4-pin CPU connector; the step most often missed is seating the 4-pin CPU plug firmly until it clicks.

When should the 290W H290AM-00 be replaced in an OptiPlex 3020?

Replace it if the system fails to start, shuts down under load, or the fan becomes noisy, typically after several years of continuous operation.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.