WMtec
WMtec FSP270-60LE 270W server power supply
270 W Flex ATX power supply for 1U servers and HTPC builds with 80 Plus efficiency, 24-pin ATX, 4-pin CPU, two SATA and two IDE connectors
- Delivers 270 W for compact server builds
- 80 Plus certified efficiency reduces energy waste
- 100–240 V input works worldwide
- Flex ATX form factor fits 1 U chassis
- SATA and IDE connectors support mixed drive types
Compact 270 W server power supply
The WMtec FSP270-60LE delivers 270 W of continuous power in a 1U form factor suited to Mini-ITX and Flex-ATX builds. It targets HTPC enclosures, thin clients and small-form-factor servers where space is at a premium. The unit carries 80 Plus certification for efficient AC-to-DC conversion.
Check AC input and connector count before ordering
Your mains supply must accept 100-240 V at 50-60 Hz, which covers most global grids. Verify that the motherboard uses a 24-pin ATX connector and a single 4-pin CPU power header. Only two SATA and two IDE drive connectors are provided, so additional drives will require adapters or a different unit.
Unit measures 15 by 8 by 4 cm with fixed cables
The compact chassis fits standard 1U bays and leaves minimal cable clutter inside tight cases. All output leads are permanently attached, so cable routing is predetermined and cannot be swapped for modular alternatives. The fixed 24-pin, 4-pin, SATA and IDE plugs simplify installation but limit re-use in builds with non-standard connector layouts.
Highlights
- Delivers 270 W for compact server builds
- 80 Plus certified efficiency reduces energy waste
- 100–240 V input works worldwide
- Flex ATX form factor fits 1 U chassis
- SATA and IDE connectors support mixed drive types
Specifications
No published specifications for this item yet.
Questions about this item
What cables and connectors come with the WMtec FSP270-60LE, and what might I need to add?
The unit includes a 24-pin motherboard connector, a 4-pin CPU connector, two SATA power plugs and two IDE power plugs; any additional SATA or PCIe cables must be sourced separately.
How do I decide whether the 270 W version is right for my build?
Choose this 270 W model if your Mini-ITX or Flex-ATX system draws up to 270 W total; a higher-wattage Flex-ATX unit would be needed for loads beyond that figure.
What does the 80 Plus rating on this 270 W PSU tell me about real-world efficiency?
The 80 Plus mark means the supply meets at least 80 % efficiency at typical loads, reducing heat and electricity cost compared with uncertified units.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



