We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver server PSU with 20-pin connector

WMtec

WMtec DPS-80PB-10A server power supply 60W 20Pin

SKU CH-ZKRT-KQSRH MPN DPS-80PB-10A

60 W server power supply with 20-pin connector and four hard-disk interfaces

  • 60W output powers DVR recorders reliably
  • 20-pin connector matches DPS-80PB-10A units exactly
  • Four hard-drive interfaces support multi-bay storage
  • Compact 12.5 × 6.4 × 10 cm footprint fits tight chassis
  • New condition ensures full rated performance from day one

60 W server power supply

The WMtec DPS-80PB-10A is a 60 watt server power supply built for Hikvision digital video recorders. It provides a single 20-pin connector and four hard-disk power interfaces. The unit measures 12.5 cm wide, 6.4 cm high and 10 cm deep. It arrives in new condition ready for installation.

Installers replacing a failed DVR PSU

Technicians servicing Hikvision recorders that require a 20-pin 60 watt source will find this unit a direct fit. Builders needing higher wattage, a different pin count or ATX-standard connectors should look at other models. The fixed cable layout also limits use in custom chassis.

20-pin connector and 60 W output

The 20-pin connector and 60 watt rating are the decisive specifications; they must match the recorder's original power board exactly. Mismatched pin-outs or insufficient power will prevent the DVR from starting. Verify the part number before ordering.

Highlights

  • 60W output powers DVR recorders reliably
  • 20-pin connector matches DPS-80PB-10A units exactly
  • Four hard-drive interfaces support multi-bay storage
  • Compact 12.5 × 6.4 × 10 cm footprint fits tight chassis
  • New condition ensures full rated performance from day one

Specifications

No published specifications for this item yet.

Questions about this item

What interface does the DPS-80PB-10A use and how many drives can it power?

The unit provides four hard disk interfaces to connect up to four drives from its 60 W output.

What are the exact dimensions I need to clear for this supply?

It measures 12.5 cm wide, 6.4 cm high and 10 cm deep, so allow that space in the chassis.

How do I install the DPS-80PB-10A and what step is often missed?

Slide the supply into the DVR bay, secure it with the mounting screws, then plug the 20-pin connector firmly until it clicks — forgetting to latch the connector is the common mistake.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.