We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

WMtec

WMtec DPS-500AB-13 A 500W server power supply

SKU CH-Y1Q0-844NC

500-watt hot-plug server power supply with 80 Plus Platinum efficiency for compatible ProLiant Gen9 systems

  • 500 W output powers demanding Gen9 servers
  • 80 Plus Platinum rating reduces energy waste
  • Hot-plug design enables replacement without downtime
  • 100 V – 240 V input works worldwide
  • Compatible with DL360, DL380 and ML350 Gen9 systems

500W Hot-plug Server PSU

The WMtec DPS-500AB-13 A is a 500W hot-plug power supply designed for ProLiant DL360, DL380 and ML350 Gen9 servers. It carries an 80Plus Platinum efficiency rating and operates on a universal 100V-240V input range. This unit suits administrators replacing a failed module or adding redundancy to compatible racks.

Tool-free Bay Installation

The hot-plug form factor allows insertion into the server's power bay without tools or system shutdown. Alignment pins guide the unit into the backplane connector; a firm push seats it and the latch locks automatically. The only common issue is inserting the module at an angle, which can bend connector pins and prevent the server from recognising the supply.

500W Capacity and Limits

At 500W maximum output the supply handles typical dual-socket Gen9 configurations with moderate storage and networking loads. It runs out of headroom when fully populated drive bays, high-wattage CPUs and multiple GPU accelerators are combined. In those scenarios the server will throttle or refuse to boot, so buyers needing more power must select a higher-wattage compatible module.

Highlights

  • 500 W output powers demanding Gen9 servers
  • 80 Plus Platinum rating reduces energy waste
  • Hot-plug design enables replacement without downtime
  • 100 V – 240 V input works worldwide
  • Compatible with DL360, DL380 and ML350 Gen9 systems

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the DPS-500AB-13 A is operating correctly after installing it in my Proliant DL360 Gen9?

The unit is hot-plug capable; once seated, the server's iLO or front-panel LEDs will show power-good status and the supply will draw 100V-240V at 5.8-2.8A 50-60Hz as listed on the label.

What comes in the box with the WMtec 500W server power supply and what must I source separately?

The supply itself (part numbers 723594-001, 754377-001, 720478-B21, 723595-101) ships as a single hot-plug module; no cables, rails or mounting brackets are included and must be reused from the chassis or ordered separately.

Which part-number variant should I choose for a Proliant DL380 Gen9 — 723594-001, 754377-001, 720478-B21 or 723595-101?

All four numbers reference the same DPS-500AB-13 A 500W Platinum hot-plug unit; select whichever P/N matches your service quote or existing inventory label — they are electrically and mechanically identical.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.