We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 4.4 mm balanced headphone cable with silver-plated OFC wires, 1.2 m long, for HD598 599 579 569 558 518

WMtec

WMtec Detachable Gaming Headphone Cable 4.4mm Balanced Silver-Plated OFC 1.2m for HD598/599/579/569/558/518

SKU CH-H0S3-R6MKS

Detachable 4.4 mm balanced cable with silver-plated OFC wiring for HD598, HD599, HD579, HD569, HD558 and HD518 headphones

  • TypeAccessories
  • Balanced 4.4 mm plug reduces channel crosstalk for cleaner stereo imaging
  • 120 silver-plated OFC strands at 99.995 % purity lower resistance and signal loss
  • 2 m length with 2.5 mm outer diameter keeps routing tidy on desktop setups
  • Detachable design fits HD598, HD599, HD579, HD569, HD558 and HD518 without adapters
  • PTFE inner plus TPE outer jacket resists kinks and microphonics during long sessions

Compatible Sennheiser Models

This cable fits the HD598 HD598se HD518 HD558 HD569 HD579 HD599 headphones with a detachable lead. The 4.4 mm balanced plug connects to players such as the TA-ZH1ES NW-WM1Z NW-WM1A PHA-2A NW-ZX300. Silver-plated OFC conductors use 99.995 % purity copper for low distortion.

Build and Materials

Four cores each contain 30 strands of 0.05 mm monocrystalline wire, totalling 120 wires spiral-woven inside a PTFE inner layer and TPE jacket. Overall diameter measures 2.5 mm and length is 1.2 metres. The silver-plated harness aims to maximise signal transmission.

Balanced 4.4 mm Requirement

The 5-pole 4.4 mm connector carries L L- R- GND and only works with sources that provide a true balanced output. Buyers whose equipment uses a different balanced terminator or single-ended jack cannot use this cable.

Highlights

  • Balanced 4.4 mm plug reduces channel crosstalk for cleaner stereo imaging
  • 120 silver-plated OFC strands at 99.995 % purity lower resistance and signal loss
  • 2 m length with 2.5 mm outer diameter keeps routing tidy on desktop setups
  • Detachable design fits HD598, HD599, HD579, HD569, HD558 and HD518 without adapters
  • PTFE inner plus TPE outer jacket resists kinks and microphonics during long sessions

Specifications

TypeAccessories

Questions about this item

Does the 4.4 mm balanced plug fit my HD598 or HD599 headphones directly?

The cable terminates in a 5-pole 4.4 mm balanced plug for the player side; the headphone end uses the proprietary Sennheiser connector that fits HD598, HD598se, HD518, HD558, HD569, HD579 and HD599.

How do I attach the cable to the headphones without damaging the socket?

Align the keyed notch on the 2.5 mm balanced connector with the groove in the headphone socket, then push straight in until it clicks — twisting while inserting bends the internal pins.

When should I replace the silver-plated OFC wires inside the 2.5 mm jacket?

Replace the cable if the 120-strand silver-plated OFC conductors (99.995 % purity) show green corrosion at the 4.4 mm plug or if the TPE outer sheath cracks near the strain relief.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.