We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver server PSU with rear handle and ventilation grille

WMtec

WMtec 700W Server Power Supply G193F YN055 Hot-plug Redundant for R805

SKU CH-Y2ZG-NVMVT

Hot-plug redundant 700 W power supply for Dell PowerEdge R805 servers, supports 100-240 V input at 50/60 Hz

  • Hot-plug design allows replacement without server downtime
  • 700 W maximum output powers Dell PowerEdge R805 workloads
  • Redundant architecture keeps the system running if one unit fails
  • Wide 100-240 V input range suits global rack deployments
  • Part numbers G193F and YN055 confirm exact fit for R805

Dell PowerEdge R805 700W PSU

This 700W hot-plug redundant power supply is built for the Dell PowerEdge R805 server. It delivers up to 700W of continuous power and accepts 100-240V input at 9.3A across 50/60Hz mains. The unit is designed as a direct replacement for part numbers G193F and YN055. It suits administrators maintaining existing R805 infrastructure.

Hot-plug redundant installation

The hot-plug design allows removal and insertion while the server remains powered, provided a second redundant unit is active. Slide the module into the chassis bay until the latch engages; no cable routing inside the server is required. A common issue is attempting a single-unit swap without a functioning partner, which causes immediate power loss. Verify the redundant partner is healthy before pulling the failed module.

Compatibility and part verification

Confirm the server model is PowerEdge R805 and cross-check the existing PSU label against part numbers G193F, YN055, 7001423-J000, Z700P-00, N700P-S0 or NPS-700BB A. Ensure the rack or chassis provides the correct redundant bay and that the mains supply falls within 100-240V at 50/60Hz. This unit will not fit non-R805 Dell servers or standard ATX cases.

Highlights

  • Hot-plug design allows replacement without server downtime
  • 700 W maximum output powers Dell PowerEdge R805 workloads
  • Redundant architecture keeps the system running if one unit fails
  • Wide 100-240 V input range suits global rack deployments
  • Part numbers G193F and YN055 confirm exact fit for R805

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the 700W PSU is operating correctly once installed in my R805?

After hot-plugging the unit into the R805, verify the server powers on and check the front-panel LEDs or iDRAC status for a healthy power-supply reading.

What comes with the G193F YN055 and do I need any extra cables?

The hot-plug redundant PSU module itself is supplied; no separate cables are required as it connects directly to the R805 backplane.

Which part number should I select — G193F, YN055, 7001423-J000 or Z700P-00?

All listed numbers refer to the same 700W unit for the PowerEdge R805; choose whichever matches the label on the module you are replacing.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.