We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver server PSU with side handle and rear connector

WMtec

WMtec 600W Hot Swap Server Power Supply H600E-S0 0NFCG1

SKU CH-FP20-V2XXW

Hot-swap 600W server PSU for PowerVault MD1200, MD1220, MD3200, MD3220, MD3400, MD3420, MD3600f, MD3620f, MD3800f and MD3820f arrays

  • 600 W maximum power for demanding server workloads
  • Hot-swap design enables replacement without system downtime
  • Wide 100-240 V input suits global rack deployments
  • +12 V rail delivers 43 A for high-current components
  • Compatible with PowerVault MD1200, MD1220, MD3200, MD3220, MD3400, MD3420, MD3600f, MD3620f, MD3800f, MD3820f

Compatible power supply for Powervault arrays

This 600 W hot-swap unit is built for Dell Powervault MD1200, MD1220, MD3200, MD3220, MD3400, MD3420, MD3600f, MD3620f, MD3800f and MD3820f storage enclosures. It delivers up to 600 W through +12 V at 43 A, +5 V at 31 A and +5 V standby at 2 A. The supply accepts 100–240 V AC at 50–60 Hz with an 8.6 A input rating.

Replaces failed or missing H600E-S0 modules

The supply matches part numbers NFCG1, 0NFCG1 and CN-0NFCG1 for direct replacement in the listed enclosures. Hot-swap capability lets you exchange the unit without powering down the array, avoiding downtime during maintenance. The upgrade is worth it when an existing module has failed or when a redundant slot is empty and the chassis requires N+1 resilience.

Fits Powervault chassis with matching power bays

The unit slides into the standard power-supply bay of the compatible MD series enclosures and locks with the integrated latch. It draws AC power from the chassis inlet and shares the backplane’s power distribution, freeing you from external cabling. No additional rails, adapters or configuration steps are required beyond seating the module and securing the latch.

Highlights

  • 600 W maximum power for demanding server workloads
  • Hot-swap design enables replacement without system downtime
  • Wide 100-240 V input suits global rack deployments
  • +12 V rail delivers 43 A for high-current components
  • Compatible with PowerVault MD1200, MD1220, MD3200, MD3220, MD3400, MD3420, MD3600f, MD3620f, MD3800f, MD3820f

Specifications

No published specifications for this item yet.

Questions about this item

Which Dell PowerVault enclosures accept the H600E-S0 0NFCG1 unit?

The supply fits PowerVault MD1200, MD1220, MD3200, MD3220, MD3400, MD3420, MD3600f, MD3620f, MD3800f and MD3820f.

How is the hot-swap module seated, and what step is often missed?

Slide the unit into the rear bay until the latch clicks; the step often missed is pushing firmly enough to engage the internal power connector.

What are the rated output currents for the +5 V, +12 V and +5 V standby rails?

+5 V delivers 31 A, +12 V delivers 43 A, and +5 V standby delivers 2 A.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.