We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal server PSU with 6-pin connector and ventilation grille

WMtec

WMtec 240W Server Power Supply D12-240P3B D12-240P1A D12-240P2A D12-240P3A PS-4241-1HC PCC002 PCC004

SKU CH-W04V-63E6M

240W server PSU compatible with HP EliteDesk and ProDesk SFF systems using a 6-pin connector

  • 240 W output powers compatible HP desktops
  • 100-240 V input works worldwide
  • 6-pin connector fits SFF chassis
  • Supports EliteDesk and ProDesk G1/G2 models
  • Multiple part numbers ensure correct replacement

Compatible 240W Server PSU

This 240 watt server power supply replaces the original unit in HP EliteDesk 800 G1 SFF and ProDesk 400, 490, 600 G1 or G2 SFF desktops. It accepts 100 to 240 volt input at 50 or 60 hertz and delivers up to 240 watts. The unit ships under one of several listed model numbers such as D12-240P3B or PS-4241-1HC.

6-Pin Connector and SFF Fit

The power supply uses a 6-pin connector that matches the motherboard header in the supported small form factor chassis. Its physical design aligns with the mounting points and airflow path of the EliteDesk and ProDesk SFF cases. No cable adapters or bracket modifications are required for installation.

Thermals and Power Draw

Rated for 240 watts maximum output, the supply operates from a 4 amp input current across the full voltage range. In normal office workloads the unit runs within its thermal envelope using the chassis fan airflow. It is not suitable for systems that need higher wattage or additional power connectors beyond the single 6-pin interface.

Highlights

  • 240 W output powers compatible HP desktops
  • 100-240 V input works worldwide
  • 6-pin connector fits SFF chassis
  • Supports EliteDesk and ProDesk G1/G2 models
  • Multiple part numbers ensure correct replacement

Specifications

No published specifications for this item yet.

Questions about this item

What input voltage range does the 240W PSU accept?

The unit operates on 100-240V AC at 50-60Hz, drawing up to 4A, so it works on mains supplies worldwide without a voltage switch.

Which chassis and connector does the supply fit?

It is built for HP EliteDesk 800 G1 SFF and ProDesk 400, 490, 600 G1 and G2 SFF cases and uses a 6-pin power connector.

How do I install the supply and what step is often missed?

Remove the side panel, unplug the old 6-pin cable, slide the new unit into the SFF bay, secure the retention screws, then reconnect the 6-pin cable firmly until it clicks.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.