We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver server PSU with rear fan grille and IEC inlet

WMtec

WMtec 240W server power supply 0M1C3 W72XN DHVJN H62JR 0TRD3

SKU CH-ZTKC-JRQY9

A 240 W server PSU compatible with OptiPlex 3040, 5040 and 7040 MT desktops

  • 240W maximum output powers OptiPlex 3040 5040 7040 MT systems
  • 100-240V AC input at 50-60Hz works worldwide
  • +12V rails deliver 16.5A and 16A for stable CPU and GPU loads
  • 5A standby rail keeps management controllers active
  • Compatible part numbers 0M1C3 W72XN DHVJN H62JR 0TRD3 ensure correct fit

Compatible Dell OptiPlex MT power supply

This 240 W switching power supply replaces units in Dell OptiPlex 3040, 5040 and 7040 micro-tower systems. It accepts 100-240 V input at 50-60 Hz and carries part numbers 0M1C3, W72XN, DHVJN, H62JR and 0TRD3. The unit ships as one of the compatible model variants D240EM-00, AC240EM-00, L240AM-00, H240EM-00 or B240EM-00.

Fits OptiPlex 3040 5040 7040 MT only

Buyers repairing or upgrading those specific micro-tower models will find the correct connector layout and 240 W rating. Systems requiring higher wattage, a different form factor or proprietary pin-outs used in small-form-factor or all-in-one chassis cannot use this unit. Shops needing redundant or hot-swap server supplies should look elsewhere.

Steady 12 V rails under continuous load

The supply delivers +12VA at 16.5 A, +12VB at 16 A and +12V standby at 2.5 A. Combined 12 V current stays within the 240 W limit during sustained operation, avoiding the voltage droop seen in short-burst ratings. Thermal protection engages if internal temperatures exceed safe thresholds during prolonged use.

Highlights

  • 240W maximum output powers OptiPlex 3040 5040 7040 MT systems
  • 100-240V AC input at 50-60Hz works worldwide
  • +12V rails deliver 16.5A and 16A for stable CPU and GPU loads
  • 5A standby rail keeps management controllers active
  • Compatible part numbers 0M1C3 W72XN DHVJN H62JR 0TRD3 ensure correct fit

Specifications

No published specifications for this item yet.

Questions about this item

Does this PSU fit the OptiPlex 3040 MT chassis without any adapter bracket?

Yes, the unit is built for the OptiPlex 3040, 5040 and 7040 MT models listed in the part-number compatibility list.

Will the +12V rails on this unit deliver the same 16.5 A and 16 A limits as the original supply in my 5040 MT?

The supply provides +12VA at 16.5 A and +12VB at 16 A, matching the original output specification.

How can I verify the PSU is operating correctly after installation?

Power on the system and confirm it posts; the +12VSB rail delivers 2.5 A for standby functions.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.