We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact silver server power supply unit with rear connector panel

WMtec

WMtec 200W server power supply F200EU-00 L200EU-00 for Opti-plex 790 990 7010 9010 USFF

SKU CH-EMQP-Z6PZ7

Delivers 200 W to OptiPlex 790, 990, 7010 and 9010 ultra-small-form-factor desktops from a 100-240 V, 50-60 Hz input

  • Delivers 200W maximum power for stable USFF operation
  • Accepts 100-240V input at 2.9A for worldwide use
  • Runs on 50-60Hz mains frequency without extra adapters
  • Matches part numbers C0G5T 1VCY4 KG1G0 6FG9T for exact replacement
  • Fits OptiPlex 790 990 7010 9010 USFF chassis directly

Compatible replacement for Opti-plex USFF

This 200 W server power supply replaces part numbers C0G5T, 1VCY4, KG1G0 and 6FG9T in Opti-plex 790, 990, 7010 and 9010 ultra-small-form-factor desktops. It matches the F200EU-00 and L200EU-00 model designations used by the original equipment manufacturer. The unit is supplied new and ready for installation.

Thermals, noise and power draw

Rated for a maximum output of 200 W, the PSU accepts a universal AC input of 100-240 V at 2.9 A across 50-60 Hz. Efficiency and fan behaviour follow the original Dell specification for these USFF chassis, so acoustic profile and thermal contribution remain consistent with the factory-fitted unit. No additional cooling provisions are required beyond the system's standard airflow path.

Sustained-load behaviour

Under continuous demand the supply maintains its rated 200 W ceiling within the same voltage and frequency limits defined for normal operation. Protection circuits guard against over-voltage, over-current and short-circuit conditions during prolonged use. The design is intended for the power envelope of the supported Opti-plex USFF platforms and is not suited to systems requiring higher sustained wattage or redundant power configurations.

Highlights

  • Delivers 200W maximum power for stable USFF operation
  • Accepts 100-240V input at 2.9A for worldwide use
  • Runs on 50-60Hz mains frequency without extra adapters
  • Matches part numbers C0G5T 1VCY4 KG1G0 6FG9T for exact replacement
  • Fits OptiPlex 790 990 7010 9010 USFF chassis directly

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the F200EU-00 in an OptiPlex 7010 USFF, and what step is often missed?

Slide the unit into the USFF chassis until the latch clicks, then press the release tab to seat the connector fully; the tab is easy to overlook.

What maintenance will this 200W PSU need over its life?

Blow dust from the intake vents every few months; the internal fan and electrolytic capacitors are not user-serviceable.

What limit appears first when the supply runs at full load continuously?

The 2.9A input rating at 100V means sustained 200W output pushes the primary-side current limit before thermal protection trips.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.