WMtec
WMtec 1200W Server Power Supply for HP DL580 G5 DPS-1200FB A
Delivers 1200 W for HP DL580 G5 servers, accepting 200–240 V input in a 240×85×35 mm metal chassis
- 1200W output powers demanding GPU mining rigs
- 200V-240V input suits standard server infrastructure
- Metal case construction protects internal components
- Compact 240*85*35mm form factor fits dense chassis
- Replaces HP DL580 G5 part numbers 438202-001, 440785-001, 441830-001
1200W Server Power Supply for HP DL580 G5
This 1200W unit is built for the HP DL580 G5 server and matches part numbers 438202-001, 440785-001 and 441830-001. It accepts 200V to 240V input at 7.8A and delivers up to 1200W output. The metal case measures 240 by 85 by 35 millimetres. It is also marketed for GPU open-rig mining workloads.
Drop-in replacement with proprietary connector
Installation is a direct slide-in swap for the original DL580 G5 power supply, requiring no cable adaptation inside the chassis. The proprietary edge connector aligns with the server backplane, so polarity and pin-out are fixed. The only common issue is forgetting that the unit needs 200V to 240V mains; it will not start on a standard 120V circuit.
Steady 1200W output under continuous load
Efficiency is rated for sustained 1200W delivery rather than short peaks, so the supply maintains its rated wattage during extended mining or compute sessions. The metal enclosure and internal fan layout move heat away from the main transformer without throttling. Continuous operation at full load is supported within the specified input voltage range.
Highlights
- 1200W output powers demanding GPU mining rigs
- 200V-240V input suits standard server infrastructure
- Metal case construction protects internal components
- Compact 240*85*35mm form factor fits dense chassis
- Replaces HP DL580 G5 part numbers 438202-001, 440785-001, 441830-001
Specifications
No published specifications for this item yet.
Questions about this item
How do I confirm the 1200W PSU is working after installing it in my HP DL580 G5?
The unit powers on when the server receives 200V-240V input and the internal fan spins; the server POST screen should show all power rails within spec without error codes.
What comes in the box and what extra cables or brackets do I need to source?
The package includes 1 power supply only; mounting rails, power cords and any GPU mining breakout cables must be purchased separately.
Which part number matches my DL580 G5 — 438202-001, 440785-001 or 441830-001?
All three part numbers are listed as compatible with the DPS-1200FB A revision; match the sticker on your original unit to the label on this PSU to be certain.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



