We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Winters Instruments

Winters Instruments PSQ15802 Pressure Gauge 0 to 30 psi

SKU CH-RGST-61QRX

Measures pressure up to 30 psi with a 2 1/2 inch dial for pressure washer systems

  • Measures up to 30 psi for low-pressure tasks
  • 2-1/2" dial provides clear pressure readings
  • Silver finish resists corrosion in wet environments
  • Designed for pressure washer compatibility
  • Model PSQ15802 ensures correct replacement fit

Pressure gauge for washer systems

The Winters Instruments PSQ15802 pressure gauge measures water force from zero to 30 psi on a silver dial. It fits pressure washer assemblies that need a direct reading of pump output.

Steady reading under constant spray

The gauge maintains its indication while the pump runs continuously, so the operator can watch pressure hold or drop during extended cleaning jobs. No burst-test figure is supplied, so peak spikes are not characterised.

Mechanical limit of the psi scale

The 30 psi upper bound defines the practical range; systems that regularly exceed this value will push the needle past the printed scale and risk damage. No electronic output or data interface is provided.

Highlights

  • Measures up to 30 psi for low-pressure tasks
  • 2-1/2" dial provides clear pressure readings
  • Silver finish resists corrosion in wet environments
  • Designed for pressure washer compatibility
  • Model PSQ15802 ensures correct replacement fit

Specifications

BrandWINTERS

Questions about this item

Does the 0-30 psi Winters PSQ15802 gauge heat up or make noise during continuous pressure-washer operation?

The gauge is a mechanical dial instrument with no powered components, so it produces no noise and generates no measurable heat while the washer runs all day.

What fitting does the PSQ15802 need on my pressure washer to install and read correctly?

The gauge connects through a standard 1/4 NPT male stem, so the pump or hose must provide a matching 1/4 NPT female port for a leak-free seal.

Will the 2-1/2" dial PSQ15802 thread into the same port as the original gauge on my older pressure washer?

Yes, if the original gauge used a 1/4 NPT connection the PSQ15802 will screw straight in; otherwise an adapter matching the old port to 1/4 NPT is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.