Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00932046BTC
In stock
WILSON SUPPLY
WILSON SUPPLY WIL-1200 gate lock pin 1/2" diameter 9/16" hole
Hardened steel gate lock pin with square head and 9/16" padlock hole for securing manual or mechanical gates
- FinishBlack
- Selling UnitEach
- TypeGate Lock Pin
- FeaturesSquare Head
- Hardened steel resists cutting and forced entry
- Square head design accepts padlocks up to 9/16" shackle
- 1/2" diameter fits standard drilled gate channels
- 4-1/2" length spans rail and slat securely
- Black finish protects against outdoor corrosion
Gate lock pin dimensions
This hardened steel pin measures four and a half inches long with a half-inch diameter and is finished in black. Its square head incorporates a nine-sixteenths inch hole sized for padlock shackles up to that diameter. The pin is sold individually and installs through matching holes in the gate rail and slat.
Builders needing a drop-in pin
Installers who can drill a half-inch hole in both the channel rail and the corresponding slat will find this pin fits directly. Projects that require a different pin length, a larger shackle clearance or a non-square head should select another model.
Half-inch diameter decides fit
The half-inch diameter determines whether the pin passes through the pre-drilled gate rail and slat without binding or excessive play. Verify the hole size on the gate before ordering.
Highlights
- Hardened steel resists cutting and forced entry
- Square head design accepts padlocks up to 9/16" shackle
- 1/2" diameter fits standard drilled gate channels
- 4-1/2" length spans rail and slat securely
- Black finish protects against outdoor corrosion
Specifications
| Brand | Wilson |
|---|---|
| Model | WIL-1200 |
| Finish | Black |
| Selling Unit | Each |
| Type | Gate Lock Pin |
| Features | Square Head |
Questions about this item
How do I install the WIL-1200 gate lock pin and what step is often missed?
Drill a 1/2" hole through both the gate channel rail and the matching slat, insert the pin, then secure a padlock through the 9/16" square-head hole; the step often missed is verifying the padlock shackle fits the 9/16" hole before drilling.
What maintenance or replacement will the WIL-1200 gate lock pin need over time?
The hardened steel pin and black finish resist wear; periodically lubricate the pin shaft and padlock mechanism, and replace the pin only if the 1/2" diameter shank shows bending or the 9/16" hole elongates.
What is the first limit that appears when the WIL-1200 gate lock pin sees heavy daily use?
The 9/16" square-head hole is the limiting factor; a padlock shackle at the maximum 9/16" diameter leaves minimal clearance, so binding or wear at the hole edge will show before the 1/2" shank yields.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
