We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Wilfly

Wilfly SS865484MM1 SAS SFF-8654 8i 74pin to Dual SFF-8654 4i 38pin Cable 100cm

SKU CH-E6JG-48G2D

Connects one SFF-8654 8i 74-pin port to two SFF-8654 4i 38-pin ports at 64 Gbps over 100 cm

  • Length0.5M
  • Connector Number3
  • PCIe 4.0 support at 64Gbps for high-speed data transfer
  • Slimline SFF-8654 8i 74pin connector fits dense backplanes
  • Dual SFF-8654 4i 38pin ends split one port to two devices
  • 100cm length gives flexible routing inside chassis
  • Three-connector design simplifies multi-drive cabling

Slimline SAS SFF-8654 8i Splitter Cable

This cable connects a single 74-pin SFF-8654 8i port to two 38-pin SFF-8654 4i ports for internal SAS storage. It serves builders wiring backplanes or controllers that use the Slimline connector standard.

Three-connector assembly enables dual 4i fan-out

The three connectors split one 8i lane into two independent 4i links without active electronics. This lets a single controller port address two separate backplanes or drive cages while maintaining the 64Gbps PCIE 4.0 data rate.

Straightforward internal routing

The 100cm reach suits typical server chassis but cannot be shortened or extended. Installers must verify that the 74-pin and 38-pin keying matches their specific hardware, as mismatched pinouts are the common cause of link failures.

Highlights

  • PCIe 4.0 support at 64Gbps for high-speed data transfer
  • Slimline SFF-8654 8i 74pin connector fits dense backplanes
  • Dual SFF-8654 4i 38pin ends split one port to two devices
  • 100cm length gives flexible routing inside chassis
  • Three-connector design simplifies multi-drive cabling

Specifications

Length0.5M
Connector Number3

Questions about this item

Will the SFF-8654 8i 74pin connector or the dual SFF-8654 4i 38pin ends need periodic replacement under normal use?

The cable is a passive assembly with no moving parts; connectors are rated for repeated mating cycles and do not require scheduled replacement.

What limits sustained 64Gbps throughput on this 100cm SAS cable first — signal integrity or connector thermal limits?

Signal integrity over the 100cm length at PCIe 4.0 speeds is the primary limit; the passive design has no active components to generate heat.

Does the cable generate noticeable heat or draw extra power when running at 64Gbps all day?

As a passive copper assembly it draws no auxiliary power and produces negligible heat even during continuous 64Gbps operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.