We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Mini SAS SFF-8088 male to four SATA 7-pin sockets with latches, 78.74in long

Wilfly

Wilfly SFF80884S20 Mini SAS SFF-8088 to 4x SATA 78.74in

SKU CH-7ATQ-S602Q

Connects a Mini SAS SFF-8088 port to four SATA drives at up to 6 Gbps with secure latching connectors

  • ColorBlack
  • Length78.74in
  • Connector Number5
  • Connector Detail1 x External Mini-SAS 26pin SFF-8088 male plug to 4 x SATA 7
  • Connect workstations or servers to four SATA drives via a single Mini SAS 26pin SFF-8088 link
  • Achieve 6 Gbps throughput across four independent channels for high-performance storage arrays
  • Stainless steel latch locks each SATA 7pin socket firmly to prevent accidental disconnects
  • 74in cable length gives flexible routing inside racks or external enclosures
  • 28AGW conductors deliver reliable signal integrity for backplane and RAID controller connectivity

Connection layout

This cable converts a single external Mini-SAS 26pin SFF-8088 male plug into four SATA 7pin sockets with latches. It lets administrators attach up to four SATA or eSATA drives to a workstation, server, RAID controller, SAS expander or host adapter that only presents an SFF-8088 port.

Signal integrity

The 28AWG conductors are rated for 6 Gbps per channel across the full 78.74in length. Stainless-steel latches on each SATA socket prevent accidental disconnects during vibration or chassis movement, keeping the link stable under normal server workloads.

Installation impact

Four separate SATA connectors emerge from one Mini-SAS port, so cable routing must accommodate the fan-out width inside the enclosure. The fixed 78.74in reach suits 2U or 4U rack depths but may leave excess slack in shallow desktop cases.

Highlights

  • Connect workstations or servers to four SATA drives via a single Mini SAS 26pin SFF-8088 link
  • Achieve 6 Gbps throughput across four independent channels for high-performance storage arrays
  • Stainless steel latch locks each SATA 7pin socket firmly to prevent accidental disconnects
  • 74in cable length gives flexible routing inside racks or external enclosures
  • 28AGW conductors deliver reliable signal integrity for backplane and RAID controller connectivity

Specifications

ColorBlack
Length78.74in
Connector Number5
Connector Detail1 x External Mini-SAS 26pin SFF-8088 male plug to 4 x SATA 7pin socket with latch

Questions about this item

How do I install the 26-pin SFF-8088 plug and avoid the common mistake of leaving the latch unsecured?

Align the Mini-SAS 26-pin male plug with the port, push firmly until the stainless steel latch clicks, then connect each of the four SATA 7-pin sockets with their latches engaged.

What maintenance will the 28 AWG cable and its five connectors need over time?

Inspect the 28 AWG conductors and all five connectors periodically; reseat any SATA 7-pin socket if the latch loosens and replace the cable if the Mini-SAS plug shows bent pins.

At what point does the 6 Gbps data rate become the limiting factor during sustained transfers?

The 6 Gbps ceiling is reached first when all four SATA channels run simultaneous heavy workloads, capping aggregate throughput at that rate.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.