We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White SFP+ DAC twinax cable with SFP+ connectors on both ends, 1.5m length

Wiitek

Wiitek WSFP-H10GB-CU1M 10GbE SFP+ DAC Twinax Cable 1.5m 30AWG White

SKU CH-NYR4-D9KNW

A 1.5 m passive SFP+ twinax cable carrying 10 Gbps for switch-to-server links

  • Length4.92 ft.
  • Delivers 10Gbps data throughput with passive copper twinax design
  • Connects SFP+ equipped switches, routers, NAS and NICs directly
  • Verified compatible with UniFi, Fortinet, MikroTik, Mellanox, Netgear, Supermicro, TP-Link, Cisco Meraki
  • Meets SFP+ MSA and SFF-8432 standards for low crosstalk operation
  • Operates reliably from 0 to 70°C (32 to 158°F)

1.5m 10GbE SFP+ DAC Cable

This 1.5 metre passive twinax cable carries 10 Gbps between two SFP+ ports. It is built for short-reach links in switches, routers, NAS units or network cards. The 30 AWG conductors and PVC jacket meet SFP+ MSA and SFF-8432 compliance. Operating temperature spans 0 to 70 °C.

Who This Suits and Who It Does Not

Network engineers stacking compatible switches or attaching a 10 GbE server within a single rack will find the length and passive design convenient. Installations that need longer runs, active signal conditioning or fibre media should look at other solutions.

Deciding Specification: 1.5 Metre Passive Reach

The cable is a 1.5 metre passive copper assembly rated for 10 Gbps. That fixed length and lack of active circuitry determine whether it fits the physical and signal budget of the intended link.

Highlights

  • Delivers 10Gbps data throughput with passive copper twinax design
  • Connects SFP+ equipped switches, routers, NAS and NICs directly
  • Verified compatible with UniFi, Fortinet, MikroTik, Mellanox, Netgear, Supermicro, TP-Link, Cisco Meraki
  • Meets SFP+ MSA and SFF-8432 standards for low crosstalk operation
  • Operates reliably from 0 to 70°C (32 to 158°F)

Specifications

Brandwiitek
ModelWSFP-H10GB-CU1M
Length4.92 ft.

Questions about this item

What comes in the box and is any extra hardware required?

The box contains the 1.5 m SFP+ to SFP+ passive twinax cable only. No additional modules or adapters are needed; both ends plug directly into SFP+ ports on your switch, router, NAS or NIC.

The listing shows 1.5 m and 30 AWG — how do I choose the right length or gauge?

This model is a single 1.5 metre, 30 AWG assembly. If your rack or cabinet needs a different reach, you would select another length from the same series; the 30 AWG gauge is fixed for this cable.

What does the 10 Gbps rating mean when the cable is installed in my switch?

The cable supports up to 10 Gbps per lane across its 1.5 metre passive copper run, compliant with SFP+ MSA and SFF-8432, so a 10GbE link will negotiate at full line rate provided both ports are 10G-capable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.