WIHA
WIHA 75220 8" Straight Blunt Insulated Tweezers hardware
8-inch straight blunt insulated tweezers with serrated carbon-steel tips, slip guards and two-layer high-contrast coatings meeting ASTM F1505, CSA, EN/IEC 60900, NFPA-70E, OSHA and VDE standards
- TypeTarps
- Insulated to ASTM F1505, CSA, EN/IEC 60900, NFPA-70E, OSHA and VDE standards for live-line protection
- Two-layer high-contrast coating gives instant visual check of insulation integrity
- Serrated round tips with slip guards grip small parts securely without marring surfaces
- Knurled steel handles provide firm control even with oily or gloved hands
- 8-inch straight blunt profile reaches into deep cavities while keeping fingers clear of energised parts
Insulated Tweezers for Electrical Work
These insulated tweezers are built for technicians who handle live conductors. The tool carries ASTM F1505, CSA, EN/IEC 60900, NFPA-70E, OSHA and VDE certifications. Two-layer high-contrast coatings provide clear visual inspection of insulation integrity. An 8-inch overall length gives adequate reach in confined panels.
Suited for Precision Electrical Tasks
The straight blunt tips with serrated texture suit gripping small components and wires during energised work. Knurled grips and slip guards at the tips improve control when wearing gloves. Buyers who need fine pointed tips for dense circuit boards should look at a different tip style. Those requiring non-metallic or ceramic tips for specialised environments must choose another tool.
VDE Certified to EN/IEC 60900
The single specification that decides fit is the VDE certification to EN/IEC 60900 for insulated hand tools. This marking confirms the tweezers meet the dielectric and mechanical requirements for live working up to the rated voltage. Without this standard the tool is not approved for electrical safety applications.
Highlights
- Insulated to ASTM F1505, CSA, EN/IEC 60900, NFPA-70E, OSHA and VDE standards for live-line protection
- Two-layer high-contrast coating gives instant visual check of insulation integrity
- Serrated round tips with slip guards grip small parts securely without marring surfaces
- Knurled steel handles provide firm control even with oily or gloved hands
- 8-inch straight blunt profile reaches into deep cavities while keeping fingers clear of energised parts
Specifications
| Brand | Wiha |
|---|---|
| Type | Tarps |
Questions about this item
How do I confirm the Wiha 75220 tweezers are safe before installing them on a live circuit?
Inspect the two-layer high-contrast insulation for cracks or wear, verify the VDE and ASTM F1505 markings on the handle, and ensure the slip guards at the tips are intact before any electrical work.
What maintenance will these insulated tweezers need over time?
Wipe the carbon steel tips clean after each use, check the serrated surfaces for debris buildup, and replace the tool immediately if the dual-colour coating shows any damage or the knurled grip becomes loose.
What is the first limit reached when using these tweezers continuously on energised parts?
The insulation rating defined by EN/IEC 60900 and NFPA 70E sets the maximum safe voltage; exceeding that threshold or using the tool with compromised coating creates an immediate shock hazard.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
