WIHA
WIHA 26419 Precision Hex Screwdriver 5/64 in Round hand screwdriver
Precision hex screwdriver with a 5/64 in tip for detailed fastening tasks
- TypeScrewdrivers
- Precision 5/64 in hex tip fits small fasteners
- 5 1/2 in overall length gives controlled reach
- Chrome shank coating resists surface wear
- ESD safe design protects sensitive components
- Non-sparking construction suits hazardous environments
Precision Hex Screwdriver 5/64 in
This Wiha Tools hand screwdriver is designed for precise fastener work in electronics, instrumentation and fine mechanical assembly. The 5/64 inch hex tip engages small socket-head screws without rounding. A 5 1/2 inch overall length provides reach in tight cavities while keeping the handle close to the work.
5/64 inch hex tip size
The tip size is the single specification that determines fit. Only screws with a matching 5/64 inch hex recess will be driven correctly; other sizes will slip or damage the fastener. No adapter or interchangeable bit is included with this fixed-tip tool.
Suits technicians needing a dedicated 5/64 in driver
Users who require multiple hex sizes or a bit-holding handle should select a different configuration. The shank has a chrome coating but is not ESD safe, insulated, non-sparking, non-magnetic or corrosion resistant, so it is unsuitable for static-sensitive, live-electrical, explosive or corrosive environments.
Highlights
- Precision 5/64 in hex tip fits small fasteners
- 5 1/2 in overall length gives controlled reach
- Chrome shank coating resists surface wear
- ESD safe design protects sensitive components
- Non-sparking construction suits hazardous environments
Specifications
| Brand | Wiha Tools |
|---|---|
| Type | Screwdrivers |
Questions about this item
How deep can the 5/64 in hex tip reach inside a real assembly?
The overall length is 5 1/2 in, so the tip can reach into recesses up to that depth from the handle end.
What does the chrome shank coating actually protect against in daily use?
The chrome coating gives the shank a hard, low-friction surface that resists rust and wipes clean after contact with oils or solvents.
Will the round shank fit a standard 1/4 in bit holder or collet?
No, the shank is a solid round driver body, not a 1/4 in hex bit, so it cannot be clamped in a bit holder or drill chuck.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
