Wiegmann
Wiegmann SC242408NK Enclosure 24x24x8 14 ga line protection
A painted carbon-steel enclosure measuring 24 by 24 by 8 inches with 14-gauge walls, captive screws and embossed mounting holes for wall-mounted line protection
- NEMA 1 rating protects indoor circuits
- 14-gauge carbon steel resists impact
- cULus and CSA certifications confirm safety compliance
- 88 in usable depth fits components
- Embossed holes and self-tapping screws speed mounting
Wiegmann SC242408NK Carbon Steel Enclosure
The Wiegmann SC242408NK is a NEMA 1 rated enclosure built from 14 ga carbon steel with a painted gray finish. It measures 24 in height, 24 in width and 8 in depth, providing a usable opening depth of 5.88 in. The solid cover secures with plated steel captive screws and includes self-tapping screws for installation. Embossed mounting holes allow direct wall mounting.
For Indoor Electrical Protection
This enclosure suits installers who need a UL Listed and cULus certified box for indoor line protection or circuit breaker housing. The CSA Certified construction meets standard commercial requirements. Buyers who require outdoor weather resistance, a higher NEMA rating or a transparent cover should look at other models because this unit is solid gray and rated for indoor use only.
Verify Mounting Space And Cover Fixing
Before ordering, confirm the 24 by 24 in footprint fits your allocated wall area and that the 8 in overall depth clears any obstructions. Check that the captive screw closure method matches your maintenance access needs and that the supplied self-tapping screws are compatible with your mounting surface.
Highlights
- NEMA 1 rating protects indoor circuits
- 14-gauge carbon steel resists impact
- cULus and CSA certifications confirm safety compliance
- 88 in usable depth fits components
- Embossed holes and self-tapping screws speed mounting
Specifications
| Brand | WIEGMANN |
|---|
Questions about this item
What mounting hardware must I already have to install this 24 in by 24 in enclosure?
The unit includes self-tapping screws for the cover; you must supply wall anchors or lag bolts suited to your mounting surface for the embossed mounting holes.
Can I fit my existing 14 ga carbon-steel panels inside the 5.88 in usable opening depth?
Yes, the 5.88 in usable depth accommodates standard 14 ga panels and typical DIN-rail components without interference from the solid cover.
How do I verify the captive screws are securing the cover to maintain the NEMA 1 rating after installation?
Tighten each plated-steel captive screw until the solid cover seats firmly against the painted gray flange; the cULus and CSA marks confirm compliance when the cover is fully closed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
