Wiegmann
Wiegmann SC182408NK Enclosure 24 in H 18 in W 8 in D 16 ga
Wall-mount carbon-steel enclosure with captive screws, 24 in high, 18 in wide, 8 in deep, 16 ga, NEMA 1, cULus and CSA listed
- NEMA 1 rating protects indoor components
- 16-gauge carbon steel resists impact and corrosion
- 24 in height by 18 in width fits standard panels
- 88 in usable depth accommodates deeper devices
- Captive plated screws simplify cover removal and replacement
Purpose-built wall enclosure
The Wiegmann SC182408NK is a carbon-steel enclosure rated NEMA 1 for indoor use, measuring 24 in height, 18 in width and 8 in depth. It suits installers who need a solid, screw-on cover to protect circuit breakers and line-protection devices in commercial or light-industrial settings. The 16 ga construction and painted gray finish provide durable protection against dust and incidental contact.
Thermal and power profile
The solid cover and 16 ga steel body dissipate heat from mounted breakers through natural convection without forced airflow, keeping internal temperatures stable during normal operation. No fans or active cooling are present, so the enclosure adds no audible noise and draws no power of its own. The 7.88 in usable opening depth ensures adequate air space around typical devices.
Build integration
Embossed mounting holes allow direct wall attachment, while included self-tapping screws and plated-steel cover screws simplify assembly. The unit meets CSA, cULus and UL listed standards, so it satisfies common code requirements without additional certification steps. Installers who require a deeper enclosure, a transparent cover or a higher NEMA rating will need a different model.
Highlights
- NEMA 1 rating protects indoor components
- 16-gauge carbon steel resists impact and corrosion
- 24 in height by 18 in width fits standard panels
- 88 in usable depth accommodates deeper devices
- Captive plated screws simplify cover removal and replacement
Specifications
| Brand | WIEGMANN |
|---|
Questions about this item
How do I mount the SC182408NK enclosure and what step is often missed?
Use the embossed mounting holes on the back of the 16 ga carbon steel body for wall mounting; the step often missed is ensuring the self-tapping screws provided are fully seated to maintain the NEMA 1 seal.
What maintenance will the plated steel screws and painted finish need over time?
Inspect the plated steel screws periodically for corrosion and retighten if vibration loosens them; touch up any scratched gray paint on the carbon steel to prevent rust.
What is the usable depth limit for components installed inside this enclosure?
The usable opening depth is 7.88 in, so any mounted device including wiring bend radius must fit within that space behind the solid cover.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
