Wiegmann
Wiegmann SC181808GNK Enclosure 18x18x8in 16ga Galvanized Steel
Galvanised steel wall-mount enclosure with screw-on solid cover, 18 in high, 18 in wide, 8 in deep, 16 ga, NEMA 1, CSA and cULus listed
- NEMA 1 rating protects indoor components
- 16 ga galvanised steel resists corrosion
- 18 × 18 × 8 in wall-mount footprint
- Embossed mounting holes simplify installation
- cULus and CSA certified for compliance
Enclosure for Wall Mounting
The Wiegmann SC181808GNK is a galvanised steel enclosure rated NEMA 1 for indoor use. It measures 18 inches high, 18 inches wide and 8 inches deep with a usable opening depth of 7.88 inches. The 16 gauge construction includes embossed mounting holes and a solid cover secured by plated steel screws. It carries CSA, cULus and UL certifications.
Suits Indoor Electrical Builds
Installers protecting circuit breakers or terminal blocks in dry indoor locations will find the NEMA 1 rating and wall-mount design appropriate. The screw-on cover provides secure access for maintenance. Buyers who need protection against water, dust or oil ingress should look at enclosures with a higher NEMA rating. Outdoor installations also require a different rating.
16 Gauge Galvanised Steel Construction
The enclosure is formed from 16 gauge galvanised steel with a silver finish. This material thickness determines the mechanical rigidity and corrosion resistance for the intended indoor environment. The galvanised coating protects the steel surface during installation and service life. Verify that the gauge meets the structural requirements of your specific mounting location.
Highlights
- NEMA 1 rating protects indoor components
- 16 ga galvanised steel resists corrosion
- 18 × 18 × 8 in wall-mount footprint
- Embossed mounting holes simplify installation
- cULus and CSA certified for compliance
Specifications
| Brand | WIEGMANN |
|---|
Questions about this item
Does the SC181808GNK include the hardware needed to mount it to a wall?
The enclosure comes with self-tapping screws and has embossed mounting holes for direct wall installation.
Will the 16 ga galvanized steel enclosure interfere with grounding of older equipment mounted inside?
The galvanized steel body provides a conductive surface; bonding jumpers can be attached to the enclosure for grounding continuity.
How can I confirm the cover is properly sealed to meet the NEMA 1 rating after closing it?
Tighten the plated captive screws until the solid cover sits flush against the enclosure body with no visible gaps.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
