Wiegmann
Wiegmann RSC151806 line protection enclosure 15x18x6 in
Carbon-steel NEMA 3R enclosure, 15 × 18 × 6 in, 16 ga, ANSI 61 grey, padlockable hasp, wall-mount, cULus and CSA listed
- NEMA 3R rating protects against rain and sleet
- 16-gauge carbon steel with ANSI 61 powder coat resists corrosion
- Padlockable hasp secures internal components
- CSA, cULus and UL listed for code compliance
- 15 × 18 × 6 in footprint with 5.88 in usable depth
Wiegmann RSC151806 wall-mount enclosure
The Wiegmann RSC151806 is a carbon-steel electrical enclosure rated NEMA 3R for indoor or outdoor wall mounting. It measures 18 in high, 15 in wide and 6 in deep with a usable opening depth of 5.88 in. The solid gray cover secures with a padlockable hasp and screw-on fastening. It carries CSA, cULus and UL listings for line-protection applications.
Sustained environmental exposure
The ANSI 61 powder-coated finish resists corrosion during long-term exposure to rain, sleet and falling dirt. Sixteen-gauge steel maintains structural rigidity when mounted on exterior walls through seasonal temperature swings. The screw-on cover and padlockable hasp keep the seal tight without loosening under vibration from nearby equipment. Continuous NEMA 3R compliance means the enclosure protects live components throughout extended service intervals.
Thermal and power characteristics
The ventilated-free solid cover relies on natural convection through the 5.88 in internal depth to dissipate heat from installed breakers. Carbon steel conducts warmth away from devices without fan noise or active cooling draw. Gray powder coating minimises solar gain when the unit sits in direct sunlight. No external power is required for the enclosure itself, so the installation adds zero load to the protected circuit.
Highlights
- NEMA 3R rating protects against rain and sleet
- 16-gauge carbon steel with ANSI 61 powder coat resists corrosion
- Padlockable hasp secures internal components
- CSA, cULus and UL listed for code compliance
- 15 × 18 × 6 in footprint with 5.88 in usable depth
Specifications
| Brand | WIEGMANN |
|---|
Questions about this item
How much heat does the 16 ga carbon steel enclosure dissipate when mounted in direct sunlight all day?
The ANSI 61 powder-coated gray finish reflects solar radiation, and the 16 ga carbon steel walls radiate heat naturally; no active cooling is required for the enclosure itself.
What mounting hardware must I already have to install this 15 x 18 in wall-mount box?
You need four lag bolts or anchors sized for the back-panel mounting holes, a level, and a drill; the enclosure ships with cover screws only.
Will my existing 151806 series back panel and DIN rail kit fit inside the 5.88 in usable depth?
Yes, any standard RSC-series back panel and DIN rail assembly designed for this enclosure depth will install without modification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
